« previous next »
Pages: [1]

Author Topic: CTEK Battery Charger/ Conditioner  (Read 1553 times)

0 Members and 1 Guest are viewing this topic.

Offline DarrenM

  • Barely Abarth
  • *
  • Posts: 2
  • Thanks: 0
    • View Profile
  • Registration Number: DK68JRO
CTEK Battery Charger/ Conditioner
« on: April 10, 2022, 07:46:57 PM »
Hi everyone, I have a Abarth 124 that will not be used as a daily driver, so was going to put on a CTEK battery trickle charger/ conditioner and use the eyelet connectors permanently connected on the battery.
Has anyone done this with theirs, and what the best way of connecting without changing the battery terminals? Cheers
« Last Edit: April 10, 2022, 08:05:26 PM by DarrenM »
Logged

Offline Geoffxb

  • 695 Member
  • *****
  • Posts: 452
  • Thanks: 14
    • View Profile
  • Registration Number: XXI5984
Re: CTEK Battery Charger/ Conditioner
« Reply #1 on: April 26, 2022, 06:19:33 PM »
I use a ,maypole intelligent trickle charger works a treat on my spider.
Logged
Super Duper spider

Offline rsk289

  • Abarth Enthusiast
  • ***
  • Posts: 171
  • Thanks: 5
    • View Profile
Re: CTEK Battery Charger/ Conditioner
« Reply #2 on: May 18, 2022, 09:30:31 AM »
Mine lives on a CTEK.  I just use the croc clips on the terminals.
Logged

Offline jl-c

  • Barely Abarth
  • *
  • Posts: 1
  • Thanks: 0
    • View Profile
  • Registration Number: SC60EWE
Re: CTEK Battery Charger/ Conditioner
« Reply #3 on: July 06, 2022, 04:25:06 PM »
I use a CTek on mine too. You can either as has been said, use the croc clips, ( lie them down so you can close the bonnet ) or just undo the nuts on the battery connections and put the eyes onto them. As long as you are careful you don't need to disturb the battery connections.You can close the bonnet with the lead coming out over the wing, there is a big enough gap to not trap the cable.
Logged
Pages: [1]
« previous next »