Abarth Owners Club
Social => General Chat => Topic started by: Bertie on January 23, 2015, 03:20:41 PM
-
I topped up my washer fluid!
Bertie
-
I topped up my washer fluid!
Bertie
I need to do this! I need to top up my rear suspension to I'm riding on the bump stops at the mo!
-
I topped up my washer fluid!
Bertie
I need to do this! I need to top up my rear suspension to I'm riding on the bump stops at the mo!
What do you mean exactly?? ???
-
Arse end of the car is to low I'm riding on the bump stops :D
-
We ran out of washer fluid the other day lol
-
Arse end of the car is to low I'm riding on the bump stops :D
That's low James! Anything else rubbing apart from your arse ;D
Can you adjust your rears without removing the rear wheel?
-
Arse end of the car is to low I'm riding on the bump stops :D
That's low James! Anything else rubbing apart from your arse ;D
Can you adjust your rears without removing the rear wheel?
You kinda can but it's a pain, it's easier to get the adjusters out and do it that way. Will be having a go at it in the morning. Either raising it up slightly or maybe taking the bump stops out altogether.
Yes it's low :) but no nothing rubs, just thump thud thump thud over bumps.
-
Arse end of the car is to low I'm riding on the bump stops :D
That's low James! Anything else rubbing apart from your arse ;D
Can you adjust your rears without removing the rear wheel?
You kinda can but it's a pain, it's easier to get the adjusters out and do it that way. Will be having a go at it in the morning. Either raising it up slightly or maybe taking the bump stops out altogether.
Yes it's low :) but no nothing rubs, just thump thud thump thud over bumps.
;D Love adjustable suspension, especially if you can adjust the damping too. What are you running on your car?
-
Cheap and cheerful FK coilovers, for the price can't fault them. Hard as hell but the big question is how long will they last, only time will tel.
-
Might have been a little naughty today..... :D
-
So very nearly ran it out of petrol, first time I've gone to 0 bars!!
-
Yesterday I sealed the Abarth Winter Kit - I realised just before I started that my Gtechniq C5 Wheel Armour bottle had broken and leaked everywhere so had to revert to using C2 instead...
Today I fitted them - pictures to come tomorrow as I finished by torch light :(
-
So very nearly ran it out of petrol, first time I've gone to 0 bars!!
Oh been there done that, once you reach that point, extreme eco driving kicks in lol
-
Before and after...
The claws are now up for sale :)
-
If only they fitted the 500 ::)
-
From memory there's a reasonable amount of machining needed to get them to fit on a 500, beyond just wobble bolts :(
-
Before and after...
The claws are now up for sale :)
Looking good Will!
-
Before and after...
The claws are now up for sale :)
Who's copying now... Haha
-
Before and after...
The claws are now up for sale :)
Who's copying now... Haha
;) Winter mode... I have a lovely set of Esseesse wheels to go on in Spring :D
-
Wish I could afford the esseesse wheels
-
I got an absolute bargain, it was one of those things you can't refuse ;)
-
Yesterday = picked up grey A500
Today = ordered team hekos, BMC air filter, Aluminium scorpion petrol cap, stubby aerial & competition gear knob.
Plenty more in the pipeline!
Car was meant to be a money saver :P :P think things are going to escalate quickly with this car. Love it!
-
New plates with carbon style letters & numbers and Abarth number plate surrounds
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20150131_133159_zpsqxlu3msi.jpg)
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20150131_133218_zpsgis2l21w.jpg)
-
Washed it!
-
Gave mine a wash and fitted the wind deflectors
-
finally got my pocket rocket back from the garage, new MAP sensor and feels like it pulls strong than before when i was running standard with the bluespark box.
-
New plates with carbon style letters & numbers and Abarth number plate surrounds
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20150131_133159_zpsqxlu3msi.jpg)
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20150131_133218_zpsgis2l21w.jpg)
Tony , I ordered these from ebay too but they are taking ages to arrive ! Did you wait long ?
-
The plates came in 2 days but the surrounds took over a week,when the package arrived the stamp and postmark were from the Czech Republic which I didn't realise when I ordered but explains the length in delivery time,
The wait is well worth it Rob they really look good 8)
-
I paid for the surrounds on the 13th of January , they were despatched the same day & I still don't have them !
-
That don't sound good then Rob,I ordered on the 22nd Jan and they arrived yesterday,maybe send a message to the seller, is your seller Moggie ?
-
Yeah, that's the fella. I'll give it another few days ....
-
Gave her a quick wash to remove all the horrible road salt
-
Gave her a quick wash to remove all the horrible road salt
Good thinking :)
I'm doing this every day!!
-
Full wash and wax comes Sunday 👍
-
Fitted some new rear lights , what do you guys think ?
-
Look good, I've been looking at changing the rears
Seen a few sets on eBay and other parts stores
-
Believe it or not I got those for £45 ! They were on eBay for £75 or best offer . I put in a cheeky offer & he accepted it . Not bad considering they are usually £90 ! They are pretty good quality too.
-
Nice one, might try a cheeky offer myself 👍
-
Topped up with screen wash
-
Topped up with screen wash
Me too!
-
Topped up with screen wash
What's this screen wash like?
-
I gave mine a good old wash..and topped up anti engine coolant as it was on minimum :o
-
Picked this up today from delivery depot
(http://i1162.photobucket.com/albums/q524/Cox_The_Fox13/Mobile%20Uploads/D731A819-B748-490D-BAD2-42639CB3FA4B_zpsc4ekoxgx.jpg)
Fitted my team hekos and bmc air filter
-
Fitted some new rear lights , what do you guys think ?
Love em!
-
Topped up with screen wash
What's this screen wash like?
First time I've used it Adey (Xmas present) but I love the colour and smells nice too
-
That's what I saw, the colour!
Looks cool compared to boring old blue
-
Applied a fresh coat of platinum wheels to my 10 spokes
-
Repositioned my exhaust tips so you can see them a little more 👍
-
Adey that exhaust is just awesome
-
4 hours of detailing, topped up my water and fitted a new bonnet vinyl :)
(http://i.picresize.com/images/2015/02/08/SPBZt.jpg)
-
Adey that exhaust is just awesome
Cheers mate! The tips were sitting slightly off from each other so needed a tad adjustment
-
Feast your eyes!
(http://i857.photobucket.com/albums/ab131/robcollick/image1.jpg)
(http://i857.photobucket.com/albums/ab131/robcollick/image2.jpg)
-
OMG I am massively jealous!
Are they brand new?
Please say you're waiting until summer to fit them!!
Bertie
-
Brand spanking new. £550 delivered.
Snapped them up! More here and the seller has white and black too http://www.ebay.co.uk/itm/271755709270?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT&clk_rvr_id=778599469185&rmvSB=true
Looks like a combo of the esseesse wheels being cheaper in Italy (likely filtering out of the dealer network now the 595 has replaced the esseesse) plus the Pound is a really good rate against the EUro at the mo is really good for us!
-
I think I'll wait a month or so to fit them (at least util the silt is off the roads) but maybe not as late as summer.
I'll wax 'em up with AF wax!
-
Ok so I have money saved up for a holiday, do I blow it on these wheels!
Thats such a bargain!!!!!!
Yeah get a 2 or 3 layers of the Mint Rims on the face aswell as the barrel :)
Did they come with the centre caps?
Bertie
-
Yup a real bargain. I think they're stock being sold off so once they're gone they may well be gone!
Came with red centre caps - I didn't think they would, but that's another £20+ saved!
They're at work (on my lunch at home at the mo) even though I only work around the corner I'll be nipping over later to pick them up.
Happy boy :D
-
Are they the same size and ET measurement as the standard 17" wheels or do you need new tyres?
-
I think I'll wait a month or so to fit them (at least util the silt is off the roads) but maybe not as late as summer.
I'll wax 'em up with AF wax!
Think im going to have to order a set in white! They came pretty damn quickly!!
-
Are they the same size and ET measurement as the standard 17" wheels or do you need new tyres?
I think they're the same as the other 17" wheels though I'll check!
-
Same tyres as the original wheels
May have to buy myself another set
-
Im ordering some ::)
-
For that price who wouldn't
-
Foolish to pass up the chance, they have white and black too.
I reckon we'll all have them, who wants to buy some mint 10 spokes? :P
-
Hahahahah im going to keep hold of mine! Although il have 3 sets of wheels.....
-
I made my first purchase for Taz. Upgraded DRL, Dip and Main bulbs. A set of Logo'ed mudflaps and a snow foam lance.
Now. What to buy for her next month?????......Some detailing supplies I suppose.
-
Fitted the pop off filter
PSSSSSHHHHHHTTTTT
-
Had the Novitec fitted today!
Springs are on route & have ordered new DRL's and dipped beam bulbs :)
Then some white SS wheels eventually.
-
Modded my air box cover to go with my yellow theme
-
Fitted my abarth owners club Instagram stickers 👍
-
Fitted my re coloured airbox cover this morning, wanted it black and yellow as I have the yellow calipers on mine, the red didn't go with anything else on my car
-
I love the mods, they look great.
-
Fitted my re coloured airbox cover this morning, wanted it black and yellow as I have the yellow calipers on mine, the red didn't go with anything else on my car
Looks good buddy
-
Cleaned the other halfs Abarth and fitted lego dust caps
-
Fitted the bluespark today. Wasn't too difficult, just a bit fiddly.
So worth the money and some. Car drives so much better now. Have the box on setting C and the car pulls so much better in 2nd 3rd and 4th. How it should of been standard.
Very pleased with the box and a bargain at £120
-
Modded my air box cover to go with my yellow theme
I like that!
-
Cleaned all my engine bay 😍
-
Looking nice!
I like the heat sheild and battery cover - are they from GT Tuning?
-
Yeah they are
Battery cover was meant to be the last made but I'm sure he will make more if demand is high
-
Modded my air box cover to go with my yellow theme
son of a bitch beat me to it!
been meaning to do this for the last 6 months or so, but think I may go for the reverse black on yellow - how did you do it Andy?
-
Modded my air box cover to go with my yellow theme
son of a bitch beat me to it!
been meaning to do this for the last 6 months or so, but think I may go for the reverse black on yellow - how did you do it Andy?
Painted the airbox, used super grip primer then black exterior satin. The decals I made myself which was time consuming and tricky but the end result was worth it
-
I do like that battery cover.Looks neat.Ive just had a look and it seems it still available.
-
It certainly cleans up and hides the nasty battery
-
It certainly cleans up and hides the nasty battery
I think il invest once ive renewed insurance in march,got my cambelt service done in april, then possibly blue spark box april Then i might invest in this battery cover.Expensive few months coming up lol.
-
Wouldn't have it any other way lol
I may (insurance permitting) go for a bluespark
-
Wouldn't have it any other way lol
I may (insurance permitting) go for a bluespark
Not sure if youve enquired but via adrian flux they only want £30 a year more for a bluespark box.
-
I fitted my new seatbelt pads and made a couple of wooden wheel support frames for tomorrows mods. (Mud flaps and light bulb upgrade).
The big one will take all four wheels stacked in pairs and the smaller one is for wheel cleaning. I've made them so that I can also use them for our Skoda estate wheels as well. Nothing made me wince as much as seeing someone lay an alloy wheel on a concrete drive to clean it!
-
Took her out for a drive with other Abarth and fiat friends :)
-
Followed my 500 driven by the other half in my supersport, forgot how good it looks when on the move :)
-
On Saturday I've de-wipered the rear and won a TMC Tuning Box for £90 on eBay.
-
Drove to work and then home again! I tend to zoom in the underground car park, this is obvious why hahaha
-
Well drove to work and got out and inspected the kerb from yesterday's nightmare, looked at my alloy again to try and reassure myself it's not that bad then swore all the way up to the office lol.
-
Froze my bits off yesterday. Taz was up on axle stands with her wheels off so I could fit the RallyflapZ and upgrade the light bulbs.
I've gone against my prejudice against Philips, and went for the Xtreme Vision H1 and H7 bulbs. My first impressions are very favourable. The PIAA's are fantastic DRL's and SWMBO agreed that yesterdays work was worth it.
We're both very happy with the mud flaps. Initially we weren't too sure about how the gloss black of the flap and the white of the logo would look. But at the end of the day it turned out just how we had imagined.
I'm glad of herself being home with me as it was alternating between dry and cold, rain and cold, and sleet! Without her and constant cups of tea I reckon I'd have died out there!
-
I've fitted my Bluespark box, chrome indicator bulbs and smoked side repeaters. Gotta say you notice the difference with the Bluespark fitted. ;D
-
Fitting LED Interior Bulbs. And fitted the TMC Tuning Box, and WOW!! I've always been skeptical of tuning boxes, and now I wish I got one ages ago.
-
Did you get it mounted ok Tom?
They do make quite a difference to the power delivery, setting do you have it in?
I find 7 to be the best!
If you change the setting remember and disconnect the eart of the battery to reset the box so it knows the setting has been changed ;)
-
Yeap, all mounted now :D
It came with it on 7, so left it on that to see how it goes and it feels fantastic. Never though it would make that much difference.
-
I can see my spending list growing! Smoked side indicators, Heko wind deflectors, Bluespark box, stainless exhaust.......
-
Got my roof down for the first time since I've brought my car. Sunny and 11oc qualifies for top down weather me thinks ;D
-
Feast your eyes!
(http://i857.photobucket.com/albums/ab131/robcollick/image1.jpg)
(http://i857.photobucket.com/albums/ab131/robcollick/image2.jpg)
Feast your eyes!
(http://i857.photobucket.com/albums/ab131/robcollick/image1.jpg)
(http://i857.photobucket.com/albums/ab131/robcollick/image2.jpg)
My resolve broke today! too good a bargain to turn down,I reckon I may have a bit of trouble sneaking these past the wife though :-)
-
The other day when I was fitting my mud-flaps, I noticed that every wheel bolt was bone dry. Of course I couldn't find my Copperslip anywhere.
I decided to tidy up my garage, ad there on the bench under half a ton of crap was the grease. So Sunday afternoon was spent taking each bolt out in turn, lightly lubing it with the aforementioned anti seize compound and re-torquing them all. I'll swear that they were rammed on with a windy gun. That's why I always take my wheels off and transport them to the tyre fitters in the back of my Octavia Estate. (Apart from the fact that I wouldn't trust he usual breed of tyre fitting monkey to lift my Abarth without wrecking it!
-
Airtec Intercooler ordered last night.
Should be with me early next week ;D ;D
-
Gave the little one a bath.
Started at 5 finished at 7 lol.
Snow foamed, tried the new g3 clay mitt..topped up with gtech quick detailer and windows finished with autofinesse crystal which im impressed with.
-
Gave the little one a bath.
Started at 5 finished at 7 lol.
Snow foamed, tried the new g3 clay mitt..topped up with gtech quick detailer and windows finished with autofinesse crystal which im impressed with.
Ive got the mitt too but not used it yet. Did you just use it with the detailer as lubricant or did you use it whilst the car had the foam on it?
-
Gave the little one a bath.
Started at 5 finished at 7 lol.
Snow foamed, tried the new g3 clay mitt..topped up with gtech quick detailer and windows finished with autofinesse crystal which im impressed with.
What did you think of the G3 clay mitt Salv? I love mine so easy to use
Ive got the mitt too but not used it yet. Did you just use it with the detailer as lubricant or did you use it whilst the car had the foam on it?
I use a wash bucket with clean water and shampoo plus the detailer as I go along
-
I'm only looking at my car on the drive as I can't drive it for another SIX weeks ,due to having a shoulder operation.i will b taking a couple of pics later,just so I can see the difference after its been polished properly by my local body shop ,i'll putthe before and after up tomoz .
-
Gave Luigi a nice wash ! and drove him to work with the roof done 8)
-
Fitted the smoked side indicator repeater lenses and Team Heko wind deflectors.
-
Looks good Taz.
Think your new rear lights are going to really suit the record grey.
-
Thanks. So do I.
The deflectors went in really quickly, with no problems. The repeaters were a right pain to get out. The originals must have been a tight push fit before the paint went on! Don't try it unless you fancy a challenge.
-
Ok this wasn't done today but on Tuesday. Now I'm not a boy racer who you can hear approaching because of the amount of bass coming from his car but when I ordered my 595 I forgot to include the interscope sound system which came as standard on my old SS so this is how I missed it.
Unfortunately the standard sound system is awful and I do like my music from time to time so I had to do something about it. I went to my local car audio center and weighed up my options and decided to go for this new alpine compact sub.
To say this thing packs a punch is an understatement, for its size it has staggered me and blows the interscope underseat sub to pieces. It really has changed my system into an absolute beast.
The sub cost me £200 fitted which is £50 cheaper than the interscope, the only downside is a little boot space has been lost but it is easily removed by simply unplugging and lifting out.
-
got my car all polished now ,can you see the difference ,lol
-
collected, fitted and delighted! ;D
woo hoo
(http://i.picresize.com/images/2015/03/14/PBhe.jpg)
before
(http://i.picresize.com/images/2015/03/14/I6nqk.jpg)
1 in
(http://i.picresize.com/images/2015/03/14/6Tb19.jpg)
both fitted
(http://i.picresize.com/images/2015/03/14/CKPAT.jpg)
lights on
(http://i.picresize.com/images/2015/03/14/eMqVc.jpg)
side view
(http://i.picresize.com/images/2015/03/14/TcQ4.jpg)
-
Looking good Tim.
Hope your pleased with them. Really suit the campovolo grey
-
collected, fitted and delighted! ;D
woo hoo
(http://i.picresize.com/images/2015/03/14/PBhe.jpg)
before
(http://i.picresize.com/images/2015/03/14/I6nqk.jpg)
1 in
(http://i.picresize.com/images/2015/03/14/6Tb19.jpg)
both fitted
(http://i.picresize.com/images/2015/03/14/CKPAT.jpg)
lights on
(http://i.picresize.com/images/2015/03/14/eMqVc.jpg)
side view
(http://i.picresize.com/images/2015/03/14/TcQ4.jpg)d
Much better,
-
Fitted my new rear springs and fiat coupe bump stops
Just got the fronts to do next weekend
-
A productive couple of days :D
-
Need to find yourself some center caps Will but looking very nice, I have the leather dash cover but didn't bother with the Gator as I actually thought the tarmac finished standard one looks better, whats your opinions on the leather gator?
-
I have the red center caps that came with the car but wan't to do something different.. There will be some nice new ones on before too long, don't worry ;D
As for the gator, well it's quite stiff at the moment... Oooh errr! :o
I like it more than the tarmac styled item, makes the interior feel like a more upmarket place to be, even with one small little change :)
-
Your full of surprises aren't you! ;)
Much were you for it, I looked at it like 5-6 months back and they wanted £45 for it I think? Couldn't justify it! even though I paid £130 for the dash cover lol... ::)
-
Will, where did you source the gator from?
I can't remember where I seen it now! :P
-
Partsworld have a stock...
I'll PM you the 10% discount code we have ;)
-
Removed most of my mods ready for the car being traded in....just drl bulbs and coupe bump stops to change tomorrow
-
More yesterday tbh but took her to donington :) chickened out on taking her on the track - she is my baby after all!
Took the racing school A500 around and it was class. The speed you carry through the corners was enough to surprise a Ferrari 350 and a lambo Diablo as I cut past them on the inside. If you are ever up that way I suggest you go give it a go. The instructor was great, really helped me get the most out of it :)
**ergh, will rotate the pic from my PC when I get home**
-
The weather is nice so I took SWMBO down to Southsea for an ice cream, and a pub lunch in the Still and West. No expense spared, me!
-
Toys!! :-)
-
All being well my intercooler and new alloys will be fitted tomorrow.
-
Went in for an m.o.t and the little one passed :).
Just needs a new rear tyre as its lookin abit low on groove.
-
You got your black centre caps then will? :)
-
insured for another year. wisely reserved the afternoon for it, usual chaos trying to explain what an SS is, £194, these are cheap cars to run
-
Yeah they really are. I was pleasantly surprised by my quote this year :D
-
You got your black centre caps then will? :)
Yep! Happy happy happy :)
-
Intercooler is fitted. Haven't got any pics during fitting as was making sure to fit it all properly. Will get a finished picture at some point soon. Didn't have time to do my wheels to so will do those when I'm back from holiday.
-
Where did you source them from Will? They look good!
-
Where did you source them from Will? They look good!
Our friend Robert at Partsworld, he never fails to disappoint ;)
-
They look great will.Nice touch :)
Ive fitted my dash cam today. Only thing im annoyed about is i bought a nice subtle flat twin usb port for the cigarette port(to keep it clutter free) and it wobbles around alot so the connection goes off so i got to find a slightly bigger one to fit the 12v cigarette charger more snug.
-
Toys!! :-)
Can u buy these individually? Git Home from work to realise I have 1 missing 😢
-
Had it resprayed....kind of ;D
-
Yay it came!
-
gave my car a wash ahead of a watford meet this sunday
-
fitted the carbon dipped dash today I got off a forum member, also had fun in the snow foam.
-
Ive fitted my dash cam today. Only thing im annoyed about is i bought a nice subtle flat twin usb port for the cigarette port(to keep it clutter free) and it wobbles around a lot so the connection goes off so i got to find a slightly bigger one to fit the 12v cigarette charger more snug.
Which one did you go for, and how is it performing? Having just read DimmyV's rant about the uninsured pondlife who drove into him the thought of Dash cams came up between SWMBO and myself. It seems to be a bit of a minefield as to what is and what is not worth considering. I was looking at Amazon and saw this. http://www.amazon.co.uk/gp/product/B00S0JSOQU/ref=as_li_tl?ie=UTF8&camp=1634&creative=19450&creativeASIN=B00S0JSOQU&linkCode=as2&tag=supe0e5-21&linkId=RSGGIFCUIU2KGE4Q
Any thoughts?
-
The OH did an oil change on the little car on Saturday now she's done 1200 miles. Eventually figured out where the housing was! Also wanted to do it before my power run this coming Saturday.
-
1200 miles? or 12'000?
Regardless I thought the Comp was every 6k miles???
-
1200 miles? or 12'000?
Regardless I thought the Comp was every 6k miles???
1200.
Yep, it's every 6000 miles, but wanted to change after the first 1000 'running in' miles. It didn't need to be done; just personal preference. :)
-
had a low mileage service done at Glyn Hopkins Chelmsford. Very happy with price and service.
-
Ive fitted my dash cam today. Only thing im annoyed about is i bought a nice subtle flat twin usb port for the cigarette port(to keep it clutter free) and it wobbles around a lot so the connection goes off so i got to find a slightly bigger one to fit the 12v cigarette charger more snug.
Which one did you go for, and how is it performing? Having just read DimmyV's rant about the uninsured pondlife who drove into him the thought of Dash cams came up between SWMBO and myself. It seems to be a bit of a minefield as to what is and what is not worth considering. I was looking at Amazon and saw this. http://www.amazon.co.uk/gp/product/B00S0JSOQU/ref=as_li_tl?ie=UTF8&camp=1634&creative=19450&creativeASIN=B00S0JSOQU&linkCode=as2&tag=supe0e5-21&linkId=RSGGIFCUIU2KGE4Q
Any thoughts?
Hi mate ive sent you a pm.
-
Took her to research garage
Cambelt change
Oil and filter
Bmc filter cleaned
Coolant topped up
All the visual checks etc
Sideskirt was abit loose and bonded back on.
All for £385(With £100 vouchers).
All i can say is research are a great dealership.Gavin the manager is very knowledgable, doesnt rush you and very approachable.The rest of the guys also very chatty.Top service research :).
I got a valuation on my car......they said atleast 7.5k for a10 plate with 13000 miles on it which i think is actually preety good :)
-
Replaced my induction pipe last night with a red Forge one. Not sure if it will actually make any performance difference, but it certainly brightens up the engine bay. Will hopefully get some pictures up tomorrow. :)
-
My car had it's first MOT and as a reward for passing, I gave my car a full valet, including wash, full wax fabric hood cleaned and protected, interior vac and clean and finally leather cleaned. At least I had a lovely day for it.
See the photo for the results of my efforts ;D
-
Fixed wonky exhaust, raised rear suspension and give it a good wash. Also washed the supersport that was covered in so much tar it took forever to remove. Amazing how a clean car can make you feel about it!!!
-
After visiting Johnsons Abarth in Solihull yesterday to find out about servicing my car. I ended up buying official Abarth mats, a keyring, a bag and a boot tidy. Fitting the mats and boot tidy this morning and put on the top mount caps for the suspension. I also found my spare key hidden in the hole in front of the handbrake, which surprised me.
-
Finally some good weather!! Time to get to work.
Finally changed the worn out gear knob for a new one, changed the pedals for the Punto Evo versions, fixed a loose trim panel in the drivers footwell, and hand stitched the shift gaiter to have red stitching. So every productive few days.
Next on the list is to replace the Abarth side strips, and renew all the badges and that should be most of the restoration work done.
-
Had my car back from the dealer today :D...after having it since Saturday (its now Tuesday) :( to have the side skirt replaced and door handle repaired (all under warranty) they decided to tell me today that the side skirt had been delivered broken!!...I was not a happy bunny!! And then they tell me that they don't do mechanical work on a Saturday, when previously i have taken it into the dealer and have things fixed on a Saturday and had things done on the same day...hummm...some things just don't add up!!
-
Had my car back from the dealer today :D...after having it since Saturday (its now Tuesday) :( to have the side skirt replaced and door handle repaired (all under warranty) they decided to tell me today that the side skirt had been delivered broken!!...I was not a happy bunny!! And then they tell me that they don't do mechanical work on a Saturday, when previously i have taken it into the dealer and have things fixed on a Saturday and had things done on the same day...hummm...some things just don't add up!!
sammi mate, sent you a pm but not sure if you read it.
Research simply bonded my sideskirt back on, it was coming off at the same spot as yours, so no need to get a whole new sideskirt.Its so far still stuck on.
so let me get this right, you've got your car back but is it fixed or do you have to go back because of the damaged sideskirt? also.....platts said to me years ago "they can come in damaged so we check them over before we ring you, if its broken they order a new one".
-
Sam glad you have had the door handle and skirt repaired at no cost to you, as usual dealers make up rules as and when it suits them and not the customer.
Hope your OK, probably see you at the Stafford Castle meet.
-
Sam glad you have had the door handle and skirt repaired at no cost to you, as usual dealers make up rules as and when it suits them and not the customer.
Hope your OK, probably see you at the Stafford Castle meet.
The skirt hasnt been repaired yet....but it will be!!!....yeahh tell me about it, espesually the dealer in question lol!! Yeah i am good thanks :), Yeah see you at the Stafford Castle meet :D
-
i don't get why they just don't bond it back on.Mine was literally coming off the same spot as yours, I thought research would say it needs a new sideskirt which would of been a faff, but surprisingly they just said easy fix with a blob of bonding on. no mess job done.So why on earth are they saying it needs a new skirt I wil never know.
-
i don't get why they just don't bond it back on.Mine was literally coming off the same spot as yours, I thought research would say it needs a new sideskirt which would of been a faff, but surprisingly they just said easy fix with a blob of bonding on. no mess job done.So why on earth are they saying it needs a new skirt I wil never know.
Because the are Platts :-X :-X lol!! i didnt understand either when they told me...i just want everything i can get of them, just so they can cock up more so i can dislike them more lol
-
Gave my car a long Sunday morning drive and then a wash and wax, ready for Donington and Stratford next weekend ;D
-
Took my A500 fo AFH1 and had titanium esseesse wheels, eibach springs, fiat coupe bump stops, mudflaps and white DRLs fitted.
She lovely!
-
Took my A500 fo AFH1 and had titanium esseesse wheels, eibach springs, fiat coupe bump stops, mudflaps and white DRLs fitted.
She lovely!
Post some pictures up! What mud flaps did you go for?
-
Just need to upload a few pics - was planning a full on detail today but it's done nothing but rain all day and I'm back at work tomorrow :(
Mudflaps are the Rallyflapz ones from ebay. seen a few peeps on the Abarth forums reccomend them so I gave them a whirl. They look great - a wee bit boy racer perhaps but they do make the car look squarer at the bottom and the 500s don't half kick up a load of dirt from the tyres!
-
Before and afters rear and side on.
-
Before and afters rear and side on.
Very pretty. Love the RallyFlapz. (Well I would wouldn't I?!!)
Seriously though, that's a lovely set up you've chosen.
-
Cheers! Pleased with the mudflaps and will be even more pleased once I get a chance to give her a clean and the flaps help her stay clean! The esseesse wheels look the mutts but we all know that. :)
(will get some proper pics and a thread running for the car when I do)
-
Yesterday a good spring clean (much needed) and put on new wheels and tyres :D
-
At last my bootspace is properly set up. No more pump and foam for Taz.
-
Finally got the garage cleared so the car can go in! Only taken 2 house moves and nearly 4 years ::)
-
Had its 18000 mile service today grand total of £0,glad I haggled 18000 & 36000 Mile services into the purchase price although the pay off was a Fiat Panda loan car for the day!
-
I got the white drls put on my car today aswell as gave it a nice morning wash ready for to tomorrows meet! Cant wait 😃
-
ordered a Novitec spring kit as well as wheel spacers front & rear...a bit of retail therapy for me today ;D
-
Had a new little vinyl put on today....
-
nice one Sammi, is that on both sides then?
I may have just purchased some new shiny Black TEAM DYNAMICS Pro Race 1.2 wheels... ;D
(http://media.lkperformance.co.uk/20131108_170225.jpg)
-
Hopefully you got/get the correct stud pattern. ;)
Fish
-
Had a new little vinyl put on today....
Where do you get these little scorpions from as I would like to add one to either end of my skirts when I get my 595 :)
-
Hopefully you got/get the correct stud pattern. ;)
Fish
lol
yh that was just a stock image I got from google...the ones I have ordered are the correct ones ha ha
-
Had a new little vinyl put on today....
Where do you get these little scorpions from as I would like to add one to either end of my skirts when I get my 595 :)
Brian I got mine from getsticker.co.uk £1:89, really good quality vinyl with a high gloss
-
Thank you newton! Will check it out now :)
-
Fitted my Novitec lowering springs (rears...fronts are on the to do list) and spacers - 16mm rear, 5mm front
(http://i.picresize.com/images/2015/05/30/9n5r2.jpg)
sitting nice at the rear now; it's taken another 9 or 10mm off the height I got from my AHM's and the spacers really help the wheel fill the arch
wheels will be fitted on Monday :D
-
(http://i.picresize.com/images/2015/06/01/flbDa.jpg)
-
looking sharp mate ;D
-
Smart that 8)
-
Leant it to my sister :o
Strange I know
-
I took delivery of my new mats and boot handle from Daron @ TMC (are we allowed to advertise here ;) ).
(http://dannyfisherweb.webspace.virginmedia.com/Abarth/Mats-s.jpg)
Fish
-
Need to tell people to take there shoes off before getting in your car :D
-
Need to tell people to take there shoes off before getting in your car :D
Only the brave get in with me. ;D
Fish
-
Gave proper wash to my Abart 500
-
Replaced my flaky badge with a shiny new one
-
A proper job as always, Lloyd ;D
-
Fitted my GTT induction kit and blow of filter. Sounds great and will possibly Become useful once the bigger inter cooler is added and mapped in. But first engine mod I have performed myself so pleased as Punch if not quite as good looking.
(http://i24.photobucket.com/albums/c21/les050964/image.jpg2_1.jpg) (http://s24.photobucket.com/user/les050964/media/image.jpg2_1.jpg.html)
(http://i24.photobucket.com/albums/c21/les050964/image.jpg1_2.jpg) (http://s24.photobucket.com/user/les050964/media/image.jpg1_2.jpg.html)
-
I decided to change the turbo
-
Dropped the SS wheels off to be refurb'd.
Fish
-
Gloss Black, thinking about some other mods that *should* be installed next month, it should all come together nicely.
Fish
-
Done 2 things today got my hands on a Salvos Crate and new registration number.
-
Collected my refurb'd wheels from A1Alloys. Only took them 2 attempts to get it right. >:(
They wont be getting a second set that I want done.
Fish
-
Change my Alloy wheels which i will post later my picture
-
Was disappointed about how flat the sound was in the 595, so I grabbed this beast :D
(http://i57.tinypic.com/14y7jt4.jpg)
-
Nice, very nice Crofty
-
Fitted my pop off Filter 8)
-
Today we got our new (used) replacement dash, which will be rubbed down and made ready for spraying gloss black.
Fish
-
I have change my Alloy Wheels finally... next is exhausts
-
Oliver, they should be much easier to clean. ;)
Fish
-
Oliver, they should be much easier to clean. ;)
Fish
That is the most reason I have bought them and also Car looks different and more likable.
-
Nice touch Oliver i really like the, alloys looking to get them myself
-
Nice touch Oliver i really like the, alloys looking to get them myself
Cheers Rizler
-
Dropped it off for the sunroof to be tinted as even with the cover pulled closed it was still letting in a lot of light. Much better now.
Fish
-
Had my tracking done on Saturday after fitting my new springs. A little adjustment on the toe needed sorting, and there's a bit of negative camber now it's lower; but that's not a bad thing. ;)
-
Yesterday a good spring clean (much needed) and put on new wheels and tyres :D
Dude that looks awesome. What tyres are you running, they look great with the wheels.
-
Yesterday a good spring clean (much needed) and put on new wheels and tyres :D
Dude that looks awesome. What tyres are you running, they look great with the wheels.
Thanks! I wanted more rubber so went for 215/40 yokohama pradas, feels like i have a little more grip at least when its dry! Some slight rubbing on the inside of front wheel liner on full lock but thats it.
-
Had a full set of Pilot Sport 3's fitted, already a much better feel than the 4k old PZero rubbish!
Fish
-
Finally had(http://i959.photobucket.com/albums/ae76/captpicard1701/IMAG0140_zpslgksdgsh.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMAG0140_zpslgksdgsh.jpg.html) the "corsa" kit fitted, pedals, mats, & cills
-
detailed, deleted rear bench and fixed a massive stone chip on my alloys...
and found a great solution for keeping the boot sound proofing/dust flap open all the way! ;D
-
Fitted a BMC panel filter
-
I managed to fit 2 fully boxed Sabelts in the back of my Yeti👍
-
checked my abarth dust caps were still there after a sticky fingered kid helped themselves to one the other day!
-
Had a full set of Pilot Sport 3's fitted, already a much better feel than the 4k old PZero rubbish!
Fish
hmm after driving the new 180 comp with these on it will certainly be my next choice of tyre - far far superiour
-
I rate Eagle F1's even higher, so there's another option for you.
Fish
-
Cant have a ocd and a clean car without tattooing those facts onto your car....:D
-
Put the Italian flag stripe on my rear spoiler. Marvelled at my box of H&R coils and imagined what it will look like once they are fitted. Not sure that counts... ;D
-
Had the windows tinted a little..
(http://i959.photobucket.com/albums/ae76/captpicard1701/WP_20150821_15_13_38_Pro__highres_zps8bf5lcjq.jpg) (http://s959.photobucket.com/user/captpicard1701/media/WP_20150821_15_13_38_Pro__highres_zps8bf5lcjq.jpg.html)
(http://i959.photobucket.com/albums/ae76/captpicard1701/WP_20150821_15_13_19_Pro_zpsb55lg1oy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/WP_20150821_15_13_19_Pro_zpsb55lg1oy.jpg.html)
-
Nice, works well with that deep red. :)
Fish
-
Nice, works well with that deep red. :)
Fish
;D thanks 8)
-
put a spare wheel and jack in the boot space.
-
Had the windows tinted a little..
Do you have any closeups of the edges of the windows were there are little black dots all the way around?? I have seen some terrable tints, just want to see if a tinter can get it done correctly.
-
The little one was currently wearing a few coats of zaino sealant z2 .I aint waxed a car in a few years as I moved from autoglym hd wax (great wax)to the sealant route (zaino). I loved the look of sealant on white but I was keen to try a wax again so I put 2 coats of dodo juice white soft wax on.I think it adds abit more gloss to it but maby leaves a slight warm tinge to it.Its difficult to judge but Im happy with the look.
-
Thanks ads :) I must say the dodo wax is easy on and off.
-
Thanks ads its a personal touch i added I had got made up to specific size and got the inspiration from the old ferrari wing badges.
-
Finally ;D ;D ;D
-
And more stickers
-
Cheers Ads ;D ;D ;D
-
Nice sticker Brian too ;D ;D ;D
-
Inspired by Brian I have installed my Abarth logo 3rd brake light! Actually look pretty good!
I'm sure somebody asked this before, but are these external or does the brake light need removing?
-
Here's my little mod for this weekend. Not much, but we think it's neat.
-
I would like one. Nothing on eBay, Amazon?
-
Hehe...i meant the light but thanks for the tricolore link
-
Let me know once you got the supplier for the light.
Cheers
-
;D
I am told that I may have access to a supply in November. I will let you know once I do :)
could I go on the list, too, please? ;) thanks!
-
Isn't this the same:
-
oh sorry, I meant the rear light cluster. Have always disliked the finish, want something darker with a darker surround
-
cheers, ads, appreciate it! Any idea on approximate cost?
-
Ok, thanks. The old laws of supply and demand. ;-)
-
Definitely.... ;D ;D ;D
Why r they that expensive around £120.00. Better stickers to be budgeted cheaper but then lights would be nice to have. Hmmmm
Let me think. Obviously once you got more info of the price Ads in Nov surely will be interested more.
-
But then as a Record Grey owner we are likely to agree on most things ;D
Is there any other colour Ads? ;D 8) ;D
Seriously tough. I couldn't imagine Taz back with standard rear lights. I just love that deep wine red colour.
-
(http://i1028.photobucket.com/albums/y342/brianwoods21/20150911_173858_zpsaofipeka.jpg) (http://s1028.photobucket.com/user/brianwoods21/media/20150911_173858_zpsaofipeka.jpg.html)
(http://i1028.photobucket.com/albums/y342/brianwoods21/20150911_173843_zps7ftgtt3q.jpg) (http://s1028.photobucket.com/user/brianwoods21/media/20150911_173843_zps7ftgtt3q.jpg.html)
(http://i1028.photobucket.com/albums/y342/brianwoods21/20150911_173829_zpsu93d17rv.jpg) (http://s1028.photobucket.com/user/brianwoods21/media/20150911_173829_zpsu93d17rv.jpg.html)
Applied this wee cracker of a sticker ;)
-
I'm just being cautious, who knows could be cheaper if there are more to go around. I do really like them and agree with you about the standard rears. But then as a Record Grey owner we are likely to agree on most things ;D
8)
-
Today I replaced a suspect battery, hopefully this will resolve my cold starting issues.
Fish
-
Gave the car a much needed wash and put my Turbo heat shield back on after a bit of a polish up, and added some shiny bolts under the bonnet.
-
purchased this beauty
(http://i.ebayimg.com/00/s/NTAwWDUwMA==/z/WPsAAOSwpDdVeMKN/$_12.JPG)
-
Very nice Tim! I NEED one of those, do you have the bolt for fixing on - where from?
-
purchased this beauty
(http://i.ebayimg.com/00/s/NTAwWDUwMA==/z/WPsAAOSwpDdVeMKN/$_12.JPG)
Eye tow?
-
I gave a break to my car...walked to work
-
Installed my smoked side indicator lenses which I'm quite pleased with 8)
Excellent choice. But then again, so it would be. You having picked a Record Grey car. The original white ones just don't look right somehow.
-
Installed my smoked side indicator lenses which I'm quite pleased with 8)
have coveted those for ages but I understand they are a right pain to fit? As I am completely cack-handed, it would involve going cap in hand to husband. Who is still b*tching about having had to change the DRL's 2 years ago (got the dealer to change them on the new car during PDI ;) - am not just a hatrack, lol) .
Any miracle suggestions that make fitting the repeaters easier?
-
hmm..big sigh... think will have to leave it for now....shame, really does complete the look on the record grey. thanks for the advice, ads.
-
Very nice Tim! I NEED one of those, do you have the bolt for fixing on - where from?
I have ordered 2 sizes off eBay - M16 90mm and 160mm (in black) like Paul suggested, the 90mm may be just too short but I'll soon find out. I'll post a pic as soon as I install it
yes Slyvano it's a towing strap, just fancied doing something to the front as I'm not sure the Maxton splitter will be practical for me
-
Very nice Tim! I NEED one of those, do you have the bolt for fixing on - where from?
I have ordered 2 sizes off eBay - M16 90mm and 160mm (in black) like Paul suggested, the 90mm may be just too short but I'll soon find out. I'll post a pic as soon as I install it
yes Slyvano it's a towing strap, just fancied doing something to the front as I'm not sure the Maxton splitter will be practical for me
Thanks Tim!
What about your rear? :o ;D
-
fitted my diffuser scorpion...
(http://i959.photobucket.com/albums/ae76/captpicard1701/DSC_0076_zpsmgo7129x.jpg) (http://s959.photobucket.com/user/captpicard1701/media/DSC_0076_zpsmgo7129x.jpg.html)
-
depends if you use locktite or non..
-
Nicely done captpicard :D
-
Very nice Tim! I NEED one of those, do you have the bolt for fixing on - where from?
I have ordered 2 sizes off eBay - M16 90mm and 160mm (in black) like Paul suggested, the 90mm may be just too short but I'll soon find out. I'll post a pic as soon as I install it
yes Slyvano it's a towing strap, just fancied doing something to the front as I'm not sure the Maxton splitter will be practical for me
Thanks Tim!
What about your rear? :o ;D
leaving the rear alone, it's perfect as it is ::)
-
(http://i.picresize.com/images/2015/09/18/qJsSD.jpg)
:P
-
Nice one S13GE...like it very much. How much did you pay for?
-
Nice i like that! - I'm guessing the strap would be rubbing the floor if turned downwards?
Like the yellow tints on the fogs too! 8)
-
this is one of the first mods I did ;)
like you say simple , but effective
-
Difference???
-
cosmetic, no more boiled egg look, just nice and clean
-
Started the long process of trying to get my car fixed. Lipscomb service team still haven't called back since yesterday, Research are being superb, just waiting to see if it's going up there or if it will go into Abarth Battersea on Tuesday.
It looks more and more like I might have lost a head gasket, as it's started to drink the coolant fluid. :(
Fish
-
Nice one S13GE...like it very much. How much did you pay for?
Only £10 mate
@Ads, thanks very much. On the subject or indicators bulbs; I had a go at mine as I've got some Diadem pearl effect ones to fit but I can't get the bulb fixing out - I'm guessing it twists like the DRL's? But which way as I can't seem to budge it at all!
-
yh thought so mate, I didn't have my pliers to hand at the time but that helps me as I couldn't even see which way they clicked out lol!
-
Changed my orange front indicator bulbs to silver. Subtle but inexpensive.
Ads
Where did you get your silver indicator bulbs from? They look so much better..
-
Hi Ads
Seen this on eBay and it isn't expensive. Well might purchase one of this soon. Cheers Ads. I waxed so much car that on car wash people said by my work they have to put sunglasses looking at my car how shiny are my alloy wheels. It was only normal wash and wax spray.
-
Cheers Ads. The one link you post it, those are right?
-
I have been experimenting recently with Plasti dip(all external chrome), hydrodipping, 500 stickers(change from scorpions) and ezlip colours. I have have already been told once to get a job, but what is retirement for, just wish I had a garage.
I digress, you guys on facebook would have seen these, but for those who are not.
As I believe black betty is fast enough for me I have gone down the cosmetic route to individualise her, I like the look but each to there own.
-
Its only just gone on, mine is not lowered, so I fitted it for look rather than protection. As ezlip is a softer texture it was easier to fit. It bends easier and it does tear, so until I drive over something I cant say.(but i expect it will be tested at chasewater this sunday when Salvo has us parking on uneven ground). As to whether it stays on is yet to be tested.
-
Changed my wheels over to the winter set with winter tyres !
Mageo
-
Jakeslade you car looks scary like Carabeen Abarth Pirate.arrrrrrrrr >:(
-
Today I saw mine sitting in the dealers with the bonnet up, so I took it's steroid based big brother home. Currently have a 500X as a loaner.
Fish
-
Nice one Fish ;D
-
Fish, how are you finding the clutch on the X500? Driven one, couldn't drive it smoothly for love nor money. Terribly hard to gauge the biting point...
-
Only had a couple of hours, mostly stuck in traffic. I'm guessing it's not a cable but a hydraulic unit. In normal 'ECO' no problem, but twist that little dial to performance and yeap finding that smooth point became almost impossible to find.
Not a bad car IMO, seats are way better than the standard 595's.
Fish
-
I can see the attraction; and it's nice-looking too, IMO; certainly not as fugly as a Juke. Well we might end up with one as a business run-around for hubs, so I'd better get used to that clutch :-(
-
Put on a new sticker!!!
(https://c2.staticflickr.com/6/5636/21894415562_7479088f5e_b.jpg)
-
Your interior is amazing Rui! Love it! And that gear linkage... OMG 8) wow is all i can say! does it work as good as it looks?
My install today seems totally insignificant - MTEC short shifter. A Brilliant piece and something i can afford!
Bit of a mare to install being buried in the engine bay on top of the gear box, no install pictures as i was eager to try it out as soon as! Install itself is pretty straight forward and simple to follow instructions that came with the adaptor. It was delivered to my door in 4 days from ordering online direct from MTEC. So basically it bolts onto your gear selector bracket deep in the engine bay, you have to totally remove the battery tray, unplug ECU. 2 x M8 bolts need to be removed from selector, these bolts hold the counter weight to the selector. A real bitch to undo as you're working in the area of a shoebox and worse still difficult to see whats going on! Scratched forearms and wrists is not a good look. So bolts off (took me over an hour). MTEC bracket onto selector bracket plus counter weight back on - 2x new M8 bolts were so easy to put back on. Gear selector is supported with a bit of wood. Then back with the battery tray, ECU, wiring back in their position. Took me over 3 hours, i would think a good mechanic would do it in an hour or less.
So in the car ignition on and of course everything needs to be set for me but i go out after just setting the clock. First impressions are a much more positive feeling, snicking into gear really nicely. Much shorter throw as they have described - its all good so far. I had only time for a quick test drive but very happy with the new feeling, several times i had already changed gear as the throw was shorter but i didn't think it was engaged into gear. Selecting Reverse seems to be much better too. Hopefully i will be able to have a proper drive tomorrow. :D
Would strongly recommend everyone to fit one of these!
-
Took it out early and drove really fast......😙
-
Your interior is amazing Rui! Love it! And that gear linkage... OMG 8) wow is all i can say! does it work as good as it looks?
My install today seems totally insignificant - MTEC short shifter. A Brilliant piece and something i can afford!
Bit of a mare to install being buried in the engine bay on top of the gear box, no install pictures as i was eager to try it out as soon as! Install itself is pretty straight forward and simple to follow instructions that came with the adaptor. It was delivered to my door in 4 days from ordering online direct from MTEC. So basically it bolts onto your gear selector bracket deep in the engine bay, you have to totally remove the battery tray, unplug ECU. 2 x M8 bolts need to be removed from selector, these bolts hold the counter weight to the selector. A real bitch to undo as you're working in the area of a shoebox and worse still difficult to see whats going on! Scratched forearms and wrists is not a good look. So bolts off (took me over an hour). MTEC bracket onto selector bracket plus counter weight back on - 2x new M8 bolts were so easy to put back on. Gear selector is supported with a bit of wood. Then back with the battery tray, ECU, wiring back in their position. Took me over 3 hours, i would think a good mechanic would do it in an hour or less.
So in the car ignition on and of course everything needs to be set for me but i go out after just setting the clock. First impressions are a much more positive feeling, snicking into gear really nicely. Much shorter throw as they have described - its all good so far. I had only time for a quick test drive but very happy with the new feeling, several times i had already changed gear as the throw was shorter but i didn't think it was engaged into gear. Selecting Reverse seems to be much better too. Hopefully i will be able to have a proper drive tomorrow. :D
Would strongly recommend everyone to fit one of these!
Been looking at these for a while, any updates since fitting?
-
ordered some eibachs.....
-
ordered some eibachs.....
Well done. The drop is sensible but the handling is much improved.
thank you. Cant wait now :D
-
Your interior is amazing Rui! Love it! And that gear linkage... OMG 8) wow is all i can say! does it work as good as it looks?
My install today seems totally insignificant - MTEC short shifter. A Brilliant piece and something i can afford!
Bit of a mare to install being buried in the engine bay on top of the gear box, no install pictures as i was eager to try it out as soon as! Install itself is pretty straight forward and simple to follow instructions that came with the adaptor. It was delivered to my door in 4 days from ordering online direct from MTEC. So basically it bolts onto your gear selector bracket deep in the engine bay, you have to totally remove the battery tray, unplug ECU. 2 x M8 bolts need to be removed from selector, these bolts hold the counter weight to the selector. A real bitch to undo as you're working in the area of a shoebox and worse still difficult to see whats going on! Scratched forearms and wrists is not a good look. So bolts off (took me over an hour). MTEC bracket onto selector bracket plus counter weight back on - 2x new M8 bolts were so easy to put back on. Gear selector is supported with a bit of wood. Then back with the battery tray, ECU, wiring back in their position. Took me over 3 hours, i would think a good mechanic would do it in an hour or less.
So in the car ignition on and of course everything needs to be set for me but i go out after just setting the clock. First impressions are a much more positive feeling, snicking into gear really nicely. Much shorter throw as they have described - its all good so far. I had only time for a quick test drive but very happy with the new feeling, several times i had already changed gear as the throw was shorter but i didn't think it was engaged into gear. Selecting Reverse seems to be much better too. Hopefully i will be able to have a proper drive tomorrow. :D
Would strongly recommend everyone to fit one of these!
Been looking at these for a while, any updates since fitting?
Cap - posted in MOD
-
Had a new exhaust fitted! ;D
-
Which one Jack.......spill the beans!
Magneti Marelli SS500Z ;D sounds tonnes better than the standard exhaust!
-
Fitted new gear knob...
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMG_20151009_153648_zps2mm8krwr.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMG_20151009_153648_zps2mm8krwr.jpg.html)
-
My latest addition today
-
Looking good!!! 8)
-
Looks great Oliver, where did you order your wind deflectors from?
-
My latest addition today
Looking really nice Oliver. Are they Team Heko?
-
Looking good!!! 8)
Looks great Oliver, where did you order your wind deflectors from?
Hi Andy
I gave Oliver the link to the same people I bought them from. Hope it helps.
http://www.ebay.co.uk/itm/DFI15156-FIAT-500-2007-up-wind-deflectors-3d-2pcs-set-HEKO-Internal-fit-TINTED-/360476139821?hash=item53ee0d612d
Looks great Oliver, where did you order your wind deflectors from?
Thank you guys, as Ads add the link where to order from, you wait like 5-6 working days but it does arrives and it is excellent product
-
Hi Andy
I gave Oliver the link to the same people I bought them from. Hope it helps.
http://www.ebay.co.uk/itm/DFI15156-FIAT-500-2007-up-wind-deflectors-3d-2pcs-set-HEKO-Internal-fit-TINTED-/360476139821?hash=item53ee0d612d
Brilliant, thanks Ads.
-
took mine into Platts Stoke for warranty work...oh my I really hope they don't fudge something up as per :-[
-
Started the winter prep today. I snow foamed, iron-x'ed and clayed the little beasty. Ready to polish and get some sealant and wax down hopefully on Friday!
-
Dropped mine off at Swansway Abarth to have some warranty work carried out, awaiting a new O2 sensor. They have given me a new 595 with TCT, lovely spec too!
-
180 Comp + TCT + Sport + Downshift = ;D ;D ;D
-
Finally lowered...
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMG_20151015_104120_zpslu6alqfz.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMG_20151015_104120_zpslu6alqfz.jpg.html)
-
Much better........a job well done. You must be pleased?
due to go to Cornwall next week so the journey down should be enough to bed in, but yes from the looks department much better, and the short drive home seemed smoother less "clonky"
-
thanks , looking forward to it :D
-
Finally lowered...
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMG_20151015_104120_zpslu6alqfz.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMG_20151015_104120_zpslu6alqfz.jpg.html)
need some wheels now , fiat standard 16 without centres make the car look stubby
-
Finally lowered...
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMG_20151015_104120_zpslu6alqfz.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMG_20151015_104120_zpslu6alqfz.jpg.html)
need some wheels now , fiat standard 16 without centres make the car look stubby
I have the centres, but forgot to fit before I took the pic :P
-
£28 on e bay for all 4 - right colour
-
£28 on e bay for all 4 - right colour
not abarth though.....
-
£28 on e bay for all 4 - right colour
not abarth though.....
That is Fiat Red Death >:(
-
£28 on e bay for all 4 - right colour
not abarth though.....
That is Fiat Red Death >:(
;)
-
Fitted my wind deflectors, thank you to Oliver for the heads up on where to get them! I was also introduced to the new Abarth keyless entry system... ::)
-
Fitted my wind deflectors, thank you to Oliver for the heads up on where to get them! I was also introduced to the new Abarth keyless entry system... ::)
Abarth keyless entry system? I think we need to thank Ads for appointing to right direction to get them from ;D
-
Fitted my wind deflectors, thank you to Oliver for the heads up on where to get them! I was also introduced to the new Abarth keyless entry system... ::)
Abarth keyless entry system? I think we need to thank Ads for appointing to right direction to get them from ;D
As in, the wedges, airbag and metal pole used to open my car this morning ;)
-
You r right there. I left once my car keys and called RAC but it was included in breakdown cover.
-
Bought some bits today. 💷💷💷
Roll on December when my warranty period expires. 😎
-
Bought some bits today. 💷💷💷
Roll on December when my warranty period expires. 😎
You have to say what you've bought. It's The Law. :)
-
Collecting this beauty next week ;D
-
You have to say what you've bought. It's The Law. :)
BMC air filter
MTEC Short shifter
Rally Flapz
Novitec springs
Wheel spacers
👍🏼
Still undecided regarding zorsts and whether to go for an ECU remap or BlueSpark/TMC tuning.
-
You have to say what you've bought. It's The Law. :)
BMC air filter
MTEC Short shifter
Rally Flapz
Novitec springs
Wheel spacers
👍🏼
Still undecided regarding zorsts and whether to go for an ECU remap or BlueSpark/TMC tuning.
Seal of Approval from the Maloutant household, popeye 8)
-
Thanks Malou 🤘🏼
-
you're welcome, Popeye.
Had my own little cockle-warming moment just now: husband popped into the garage (where the Abarth has been patiently sitting for 2 weeks, waiting for a dry day), came back into the house and said "that's a bloody good-looking car you've got there, Missus" ;D
-
He's after something ;D
-
....well it had better not be him trying to wriggle out of getting me my alcantara interior as a xmas present! :o
-
😂
-
I wonder if my other half will get me a car pressie for Xmas......😙
-
drop enough hints and the world is your great big Abarth oyster! Or maybe that only works in my house....... am not too old/proud to use pester power. ::)
-
A bit of the subject!!!! :(
-
Thanks for the advice👍
-
Washed and polished in anticipation of 'mods' arriving tomorrow. 😎
-
Gave her a clean with chemical guys gloss shampoo, finished with a qd of finishare fk425 :).
-
Black front whisker fitted then one coat of FK1000p, followed by a coat of FK#2685 pink - following a return from cornwall and the salty sea air and winter prep...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151104_123446_zpsni9fm6oy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151104_123446_zpsni9fm6oy.jpg.html)
-
That looks really smart mate. Good job.
thanks Ads
-
Black whiskers look great. Are they carbon or black plastic?
-
Changed the bluespark to D setting. Less wheel spin more pull higher up.
-
Black whiskers look great. Are they carbon or black plastic?
matt black plastic for a comp...
-
Thanks, I can see my Christmas list being added to.
-
Black front whisker fitted then one coat of FK1000p, followed by a coat of FK#2685 pink - following a return from cornwall and the salty sea air and winter prep...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151104_123446_zpsni9fm6oy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151104_123446_zpsni9fm6oy.jpg.html)
Crikey! That looks awesome ;D I now feel very inadequate as my A500 is shamefully filthy! Our sugar beet season is in full swing here and, not being far from British Sugar's refinery at Cantley, the roads (son says we don't have roads, just medieval cart tracks that someone has thrown the odd bit of tarmac at! :() round here are an absolute quagmire! I really don't like these dark winter days. Roll on spring!
-
Heko's fitted...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151104_123508_zpsstnymw9q.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151104_123508_zpsstnymw9q.jpg.html)
-
It's a slippery slope ???
-
Mod addict....hmmm maybe we have to start our own website ???
-
will have to end soon as the pennies have ran out :P
-
Captpicard - I'm getting the last thing which exhaust...that's it for this year. :'(
-
Hi Oliver, yes I did want to change the back box too , but struggling for funds at the mo' :'(
-
If you order from Germany it would cost you £217,00 (Exhaust, Small part+Vat+Delivery)
I done it
-
If you order from Germany it would cost you £217,00 (Exhaust, Small part+Vat+Delivery)
I done it
that's £200+ I don't have at the mo' :-\
but thanks for the heads up
-
gave my wheels some much needed tlc; polished, waxed and any stone chips etc have been painted :)
-
Taken my best white wheels off for the winter, last year i left a set on and the effects Of salt and grit were pretty obvious by the end of winter.
So, after a break of 19 months I'm running with the original style 17 inch diamond cut wheels. The tyres should just about see me through to the spring even though two of them were on the car from new.
I think I'll put proper winter tyres on this set of wheels for the future
-
Winter wheels and tyres put on and summer wheels put to bed before Kent grinds to a halt due to this weekend's predicted 5 minute snow flurry :oo
Mind you finished just before it started to pee down, winter must have arrived on the Kent coast 8)
-
Looking good, Tony
Must dig my winter wheels out... I can just about see the crate lurking in the depths of the garage, under the junk :(
-
Looking good, Tony
Must dig my winter wheels out... I can just about see the crate lurking in the depths of the garage, under the junk :(
Best get a move on Will I'm sure I saw a slightly dark cloud on the horizon!
-
Winter wheels and tyres put on and summer wheels put to bed before Kent grinds to a halt due to this weekend's predicted 5 minute snow flurry :oo
Mind you finished just before it started to pee down, winter must have arrived on the Kent coast 8)
Tony, where did you get these ramps from? I stand no chance jacking my car up, so need to get something like this to lift the front enough. Even our low entry jack is too high for the sills once you start raising it!
-
No more stickers ;D
But not for long ;D
-
Winter wheels and tyres put on and summer wheels put to bed before Kent grinds to a halt due to this weekend's predicted 5 minute snow flurry :oo
Mind you finished just before it started to pee down, winter must have arrived on the Kent coast 8)
Tony, where did you get these ramps from? I stand no chance jacking my car up, so need to get something like this to lift the front enough. Even our low entry jack is too high for the sills once you start raising it!
Here you go http://www.halfords.com/camping-leisure/caravan-motorhomes/caravan-accessories/level-up-plus-pair
Makes life a bit easier when jacking up the front ;D
-
Winter wheels and tyres put on and summer wheels put to bed before Kent grinds to a halt due to this weekend's predicted 5 minute snow flurry :oo
Mind you finished just before it started to pee down, winter must have arrived on the Kent coast 8)
Tony, where did you get these ramps from? I stand no chance jacking my car up, so need to get something like this to lift the front enough. Even our low entry jack is too high for the sills once you start raising it!
Here you go http://www.halfords.com/camping-leisure/caravan-motorhomes/caravan-accessories/level-up-plus-pair
Makes life a bit easier when jacking up the front ;D
Nice one! Thank you. ;D
-
I'm going to get Oliver some stickers for xmas ::)
-
I'm going to get Oliver some stickers for xmas ::)
Thank you Chris ;D
-
It's that time of year again!!
;D
-
Hi Guys
A couple of you have posted about fitting the winter wheels / tyres here, I have mine ready and will be fitting them next weekend.
When discussing this with workmates I get some funny looks and general comments about it not being a worthwhile expense. I reckon as we live in the Pennines, we should get value for money from ours :D
What is the general feeling about winter tyres, is there a real difference in grip and does handling in the dry suffer in any way?
Cheers
Andy
-
I posted this on Facebook earlier when someone asked the same :)
The compound of summer tyres is not designed to deal with temperatures of less than 10 degrees (varies between tyre).
The compound used in winter tyres is designed to be effective at lower temperatures, plus the tread patterns are developed to disperse water far more efficiently.
You get a massive improvement in general stopping distances with winter tyres in colder conditions than you would with a summer tyre.
People winge about cost but that's another misconception. Yes you've got to buy another set of rubber, but the winter tyres will wear far slower than your summer rubber would. You can make a set of winters last for 20k before you consider changing
The 'snow' element is the bit that puts the general public off winter tyres because we don't have enough to warrant it, but we have lots of freezing mornings and cold standing water.
I was a sceptical until a set of winters saved me the first time, since I won't be without a set ;D
-
Proffesionaly valeted
Topped up washer fluid
Full tank of V-Power Nitro
Ordered Pioneer SPH-DA120 + fitting kit!
-
Will,that is the best case yet that I've heard for winter tyres,I may even pick some up :)
Winter Tyres-They only need to save you once.
Would make a pretty good strap line for an advertising campaign👍
-
Thanks for the reply Will, not a user of Faceache so would never have read your post there :)
I agree that they only need to save you once.
My question about the use of winter tyres is kind of created by the fact that in Italy, it is law that from the 15th Nov to the 15th Apr, your car must either be fitted with winter tyres or have a set of snow chains in the boot. Understandable in the North of the country maybe, but central and south have a generally moderate (to damn hot) climate.
Andy
-
took a pic of my new boot handle and rear badge.
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMAG0001_zpsomd9ipjq.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMAG0001_zpsomd9ipjq.jpg.html)
now matches the front
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151104_123446_zpsni9fm6oy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151104_123446_zpsni9fm6oy.jpg.html)
-
Look a bit high but i like this height of the Decal, it was a shame the other half blowed away, that is when you don't have proper garage at all. :o
-
took a pic of my new boot handle and rear badge.
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMAG0001_zpsomd9ipjq.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMAG0001_zpsomd9ipjq.jpg.html)
now matches the front
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151104_123446_zpsni9fm6oy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151104_123446_zpsni9fm6oy.jpg.html)
Looks really good with red and a black soft top. It needs the black trim in my opinion. Definitely a lovely upgrade buddy.
Thanks Ads, also managed to get a cheap set of rear lights with the black edging, what is the black trim you mentioned?
-
aaah, thank you :)
-
aaah, thank you :)
A really nice Abarth mate, where did you get the plates made ?
-
How easy is it to fit the replacement front whisker etc please Picard, I'm thinking about doing this also. Thanks.
-
aaah, thank you :)
A really nice Abarth mate, where did you get the plates made ?
the great bay of "e"...
http://www.ebay.co.uk/itm/321413552350?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-
How easy is it to fit the replacement front whisker etc please Picard, I'm thinking about doing this also. Thanks.
it depends on how much work you want to do and if you want to keep the original whisker afterwards..
if you wish to save the original whisker , I would recommend removing the front bumper,
however I didn't , so I just removed the 4 screws on the front on the engine panel , to get may hand behind the bumper and worked it that way, snapped off the lugs with star washers on and saved, undid the 1 nut holding the centre badge on, refit was just a matter of pushing the new whisker back on being careful refitting the star washers and re-bolt the centre badge.
the rear badge, just gently warm(best to) then use an old credit card or dental floss to remove the badge , clean the area and refit the new.
the boot handle was as easy, remove the boot lining, then unclip the electric connecter, undo the 4 bolts and remove, re fit is the reverse.
hope this helps.
Mark
-
Mark those plates are lovely in pressed metal. Kind of modern retro touch.
Thank you ;)
-
Cleaned and waxed ;D
-
How easy is it to fit the replacement front whisker etc please Picard, I'm thinking about doing this also. Thanks.
it depends on how much work you want to do and if you want to keep the original whisker afterwards..
if you wish to save the original whisker , I would recommend removing the front bumper,
however I didn't , so I just removed the 4 screws on the front on the engine panel , to get may hand behind the bumper and worked it that way, snapped off the lugs with star washers on and saved, undid the 1 nut holding the centre badge on, refit was just a matter of pushing the new whisker back on being careful refitting the star washers and re-bolt the centre badge.
the rear badge, just gently warm(best to) then use an old credit card or dental floss to remove the badge , clean the area and refit the new.
the boot handle was as easy, remove the boot lining, then unclip the electric connecter, undo the 4 bolts and remove, re fit is the reverse.
hope this helps.
Mark
Thanks!! Ordered a new matt black whisker, boot handle and rear badge, will get them carbon dipped and fitted at some point soon.
-
Would have been much cheaper to have the existing ones wrapped with carbon wrap,I've had all my badges/whisker/boot handle/rear badge,door handles,wrapped in black,its withstood many pressure washes and looks great, cost £200 all in,plus it's easy to go back to original or change it and it protects the parts keeping them clean and new,you won't notice the difference on small exterior parts unless someone really anal gets up really close to inspect it.
Also you can save on the £130 spent on parts and the hassle of fitting the new ones.
-
Would have been much cheaper to have the existing ones wrapped with carbon wrap,I've had all my badges/whisker/boot handle/rear badge,door handles,wrapped in black,its withstood many pressure washes and looks great, cost £200 all in,plus it's easy to go back to original or change it and it protects the parts keeping them clean and new,you won't notice the difference on small exterior parts unless someone really anal gets up really close to inspect it.
Also you can save on the £130 spent on parts and the hassle of fitting the new ones.
Thanks CB. I'm hoping to recoup some of the cost by selling the old items on fleabay. I may go down the wrapping route for the door handles though as they look like a right faff to get off and back on. Was it the 3M 1080 wrap you used? Do you have any pics of the finished items? Cheers.
New to the forum but I've already got the modding bug!! ::)
-
Here's a few pics.
I also had fog light surrounds done!
-
Looks good, especially on a black car. Hoping my funk white looks good with them as well.
Reminds me, I need to look for a n/s fog light surround, it was missing when I picked up the car and the stealer wants the best part of £60 for one.
-
Matt black would look great on yours👍
-
Matt black would look great on yours👍
CB - what is going on with your car? Is it still at the Angel Tuning?
-
Not much....got a new turbo going on tomorrow😙
-
Oliver,I saw these stickers and thought you may like them ::)
-
Oliver,I saw these stickers and thought you may like them ::)
I do like it, haha
-
Go big or go home!!!
-
Go big or go home!!!
Have you bough already for me?
-
They are on an American car,you need to search for them)
-
latest little mod...
(http://i959.photobucket.com/albums/ae76/captpicard1701/IMAG0135_zps8ctnitot.jpg) (http://s959.photobucket.com/user/captpicard1701/media/IMAG0135_zps8ctnitot.jpg.html)
-
They look quality! Very nice alternative to the norm.
Thanks Ads, just wanted something a little different for a change
-
;), that's very true...
-
We had our Diavolo Due professionally detailed over yesterday and today. He looks sh*t hot, the depth of reflection is fantastic, can't praise the guy who did it enough.
Managed to drive back from Altrincham to Bacup without a sniff of rain, we get 200 mars from home, a spit of rain and a little shite at the side of the road throws a tennis ball at us :-[
Putin might have been pissed off yesterday, but the retribution I was about to wreak on the little git would not have been describable.....
Fortunately for both of us, the traffic was that bad, I couldn't get out of the car, and the ball just left a wet mark which has washed off.
Will be putting the winters on at the weekend.
Andy
-
Fitted my BMC filter. Next job is the PIAA DRL's.
-
Fitted my BMC filter. Next job is the PIAA DRL's.
that's a simple but very effect mod 8)
-
tinted my indicator lenses
(http://i.picresize.com/images/2015/11/26/FKmC.jpg)
also fitted the 'ABARTH' brake light decal
...oh sh*t yh I also painted my air box cover satin black too!
-
tinted my indicator lenses
(http://i.picresize.com/images/2015/11/26/FKmC.jpg)
also fitted the 'ABARTH' brake light decal
...oh sh*t yh I also painted my air box cover satin black too!
Beautiful detail in your tyres.... How? :-\
-
S13GE - Question! Where did you get your racing stripes? Did it car come with it or you put on? Looks good man on your car. I got some but very scary to put as need another person to help me, my wife aways come late home when dark is out. ;D
-
S13GE - Question! Where did you get your racing stripes? Did it car come with it or you put on? Looks good man on your car. I got some but very scary to put as need another person to help me, my wife aways come late home when dark is out. ;D
Interested also....
-
Oliver,I saw these stickers and thought you may like them ::)
They don't sell these stickers, right? http://shop.500madness.com/index.php?route=product/category&path=114_123_247&page=1
-
Sylvano - i couldn't find excatly the same, got to be from Italy direct similar.
-
Sylvano - i couldn't find excatly the same, got to be from Italy direct similar.
In Ebay, streetrace.org sells these big stripes... but I bought in the past others stickers from them and I didn't like very much the kind of vinyl that they sell... :-\
-
tinted my indicator lenses
(http://i.picresize.com/images/2015/11/26/FKmC.jpg)
also fitted the 'ABARTH' brake light decal
...oh sh*t yh I also painted my air box cover satin black too!
Sylvano the tyre detail is done with a yellow tyre paint pen. You can buy them in all sorts of colours on eBay.
Beautiful detail in your tyres.... How? :-\
Ads; you have not written anything.... ;)
-
Sylvano - i bought from StreetRace web dite but as you said now quit nice vinyl quality so i bought it from eBay direct from Italy and this are original ;D
-
Sylvano - i bought from StreetRace web dite but as you said now quit nice vinyl quality so i bought it from eBay direct from Italy and this are original ;D
But you have not bought it yet, right?
-
I meant to say that Street race vinyl aren't that great quality...sorry read my self and make no sense. I have ordered from eBay but they are from Italy, much better quality
-
I meant to say that Street race vinyl aren't that great quality...sorry read my self and make no sense. I have ordered from eBay but they are from Italy, much better quality
Could you share the link please? ::)
-
I meant to say that Street race vinyl aren't that great quality...sorry read my self and make no sense. I have ordered from eBay but they are from Italy, much better quality
Could you share the link please? ::)
I know they are a bit expensive but as you live in Europe might be cheaper postage. Cheers
http://www.ebay.co.uk/itm/Racing-stripe-stickers-for-fiat-500-abarth-assetto-corse-decals-side-aufkleber-/181508731983?hash=item2a42c3744f:g:j68AAOxyaURThOyh
-
I meant to say that Street race vinyl aren't that great quality...sorry read my self and make no sense. I have ordered from eBay but they are from Italy, much better quality
Could you share the link please? ::)
I know they are a bit expensive but as you live in Europe might be cheaper postage. Cheers
http://www.ebay.co.uk/itm/Racing-stripe-stickers-for-fiat-500-abarth-assetto-corse-decals-side-aufkleber-/181508731983?hash=item2a42c3744f:g:j68AAOxyaURThOyh
And you have already installed in your Abarth? ;D
Thanks dude!
-
Not yet. I don't have a garage and this days it is quit rainy and too windy. One day.
-
Not yet. I don't have a garage and this days it is quit rainy and too windy. One day.
I wait so that you fit them
-
Put on new rear lights.
-
Installed my PIAA DRL's. What a pain in the ass they are! Would be much easier with the wheels off and a ramp. On the street and by the kerb was certainly not ideal. All done now though, and only moderately grazed knuckles. Great success!! ;D
-
Here's some pics,I put a few in of intercooler/grill for good measure ;D
-
You done very well finding those,I'd never liked that look before but they do make a big difference ;)
-
"We" spent the whole day together,I've been without little squirt for a while,nearly changed the turbo but left it as was for now(I'm glad I did as the ATM has made a big difference)
Changed the rear lights,wanted to do day times and high beam but my hands and wheels are jointly too big to complete the task(
Did manage to wash/polish and Hoover I in between outbursts of rain though ;D
-
I put on the winter wheels.
Having fitted 215/40/15s to the 17" 10 spoke wheels, I will warn others looking down this route that the tyre pressure indicator goes off.
Don't panic.
Go into the menu system and reset the tyre sensor. It is OK.
Andy
-
I drove mine for the first time in two weeks.
Fish
-
I put on the winter wheels.
Having fitted 215/40/15s to the 17" 10 spoke wheels, I will warn others looking down this route that the tyre pressure indicator goes off.
Don't panic.
Go into the menu system and reset the tyre sensor. It is OK.
Andy
Andy - that the same happened to me...i haveberntold also just to reset the tyres.
-
Having fitted 215/40/15s to the 17" 10 spoke wheels, I will warn others looking down this route that the tyre pressure indicator goes off.
I'm not surprised the tyre pressure sensors went off ;D i do assume they are 17" tyres not 15 ::)
And where is this reset the tyres in the menu system? Do i have it?
-
the tyre reset is on the new models for definite with the new LCD colour display within the settings menu, no idea where it is on the older models.
-
...ahh thanks Capt. I had the little tyre pressure caps - which never worked, hopefully they've been recycled by now!
-
Having fitted 215/40/15s to the 17" 10 spoke wheels, I will warn others looking down this route that the tyre pressure indicator goes off.
I'm not surprised the tyre pressure sensors went off ;D i do assume they are 17" tyres not 15 ::)
And where is this reset the tyres in the menu system? Do i have it?
Very definitely a typo, incompetent on the keyboard!
17" rims and tyres they are.
Andy
-
these arrived today...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151204_191412_HDR_zpsdpyhjdyn.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151204_191412_HDR_zpsdpyhjdyn.jpg.html)
-
Is that the seatbelt cover/pad? I was about to purchase them the other day but thought possibly there may be an issue of the seatbelt rolling back up as the space is quite slim. Hopefully this isnt an issue
-
these arrived today...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151204_191412_HDR_zpsdpyhjdyn.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151204_191412_HDR_zpsdpyhjdyn.jpg.html)
captpicard - Have you ordered from Amzon? I got al 4, front 2 and 2 on the back :P :P :P
-
Amazon do have them...cheap also
http://www.amazon.co.uk/gp/product/B014H2BRJE/ref=as_li_tl?ie=UTF8&camp=1634&creative=19450&creativeASIN=B014H2BRJE&linkCode=as2&tag=577775-21
-
these arrived today...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20151204_191412_HDR_zpsdpyhjdyn.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20151204_191412_HDR_zpsdpyhjdyn.jpg.html)
captpicard - Have you ordered from Amzon? I got al 4, front 2 and 2 on the back :P :P :P
Hi Oliver, yes they were from amazon, only got the 2 at the mo' for the front
-
Amazon do have them...cheap also
http://www.amazon.co.uk/gp/product/B014H2BRJE/ref=as_li_tl?ie=UTF8&camp=1634&creative=19450&creativeASIN=B014H2BRJE&linkCode=as2&tag=577775-21
HI Rui, yes they are the ones...
-
hmmm just realised these look different to the ones I was looking at. What material is this made from?
-
hmmm just realised these look different to the ones I was looking at. What material is this made from?
Carbon Fibre ;D
-
hmmm just realised these look different to the ones I was looking at. What material is this made from?
pvc or similar, just have the carbon look
-
Carbon made in Chine ;D
-
Finally fitted them ;D ;DFinally after long wait they fitted all 4x just kept my Pirelli tyres and all cost £40.00 with the discount as guy who fitted it them has Subaru With 356bhp and he liked my Abarth too
-
Just fitted Osram Night Breaker Unlimited H7 & H1. My God it's a pain fitting the H1 but once you know what you are doing releasing the metal clips it wasn't too bad. Hopefully they perform well but for £34 it was probably a worthy upgrade. Good news is they don't have that fake xenon glow to them.
Any picture!!!
-
Installed an Cybex ISOFIX base and Aton baby carrier. ;D
-
Oil service done!
-
Oil service done!
Well done ;D ;D
-
painted the front callipers bright yellow! Loving the Hammerite smooth yellow paint - it's the exact shade I was after ;D
I'll do the rears over the weekend hopefully and they will no longer look orangey-yellow
-
swapped my red stripe seats for my mates grey stripes, he has a red A500 so it made sense ;)
-
It's the little things :)
-
painted the front callipers bright yellow! Loving the Hammerite smooth yellow paint - it's the exact shade I was after ;D
I'll do the rears over the weekend hopefully and they will no longer look orangey-yellow
Pictures Tim
-
;)
(http://i.picresize.com/images/2015/12/20/Dz3b.jpg)
-
Bery nice Tim, i need to paint mine in red to match with the rest of the colour ;D
-
winter mods have started!!!
-
84000 mile oil and filter change and an MOT
2 advisories, rear pads getting low, to be expected as they,ve been on for 40000 miles and the exhaust is deteriorating after 8 and half years and 79000 miles
not bad at all I reckon
-
phase 2 of winter mods completed 2day!!!!
-
Finally got round to fitting my BlueSpark and Forge intake hose. Not driven the car yet, but it starts fine so hopefully I haven't broken anything!!
-
I do like you wheel Tim...... ;)
cheers Ads ;)
-
Fitted the Competizione boot handle and badge on my A500, just got the whisker and door handles to do now. IMO they dark grey looks so much better than the chrome against the funk white.
-
Fitted the Competition boot handle and badge on my A500, just got the whisker and door handles to do now. IMO they dark grey looks so much better than the chrome against the funk white.
Looks great!!!!
-
Washed the white petal alloys on our Abarth. Must be the worst combo to keep clean. :( Luckily my hands go through the spokes . ;D They do look amazing when clean though. Also polished the chrome tips on our Monza for the first time so because of that got a bit of polish on the rear black diffuser >:( so had to put bumper treatment on that too. ;D haven't driven it since ??? it seems the rear wheels get dirtier than the front
-
Removed my daughters wheels for her to detail them and the calipers too.
-
Removed my daughters wheels for her to detail them and the calipers too.
I need to do this!!
-
You guys really remove wheels to clean them?
I thought I was OTT buying a special brush for them ???
-
Yeah!!!!
I have more spokes than a Choppers rear wheel :o
-
Once every 6 months they get removed, cleaned, clayed and sealed then refitted.
Fish
-
I'm putting on a new set and also changing another set next week,what would be the best product to seal up Matt black wheels before they go on?
-
I bought this:
iChemical Guys Jet seal MATTE 16oz
Is there anything better?
-
Thanks👍
-
Today was clean the cars day, whilst I was at it I gave the 595 a wet coat to up.
Fish
-
Same for me,1 down 2 to go.
-
gave mine a really good clean
(http://i.picresize.com/images/2016/01/23/aIvNL.jpg)
(http://i.picresize.com/images/2016/01/23/gRzGx.jpg)
-
If only the forum software could resize the pictures properly. Half the reduced need to open in another tab/window to see them properly. :(
Great work though guys.
Fish
-
I too got rid of 3 weeks of grime from the buggy. Cannot believe how much tar spotting is attached to almost every panel.
Considering my options as to how to get rid of it (the tar not the car) :)
Andy
-
2 down.
I'm not sure what's the hardest to keep clean,black or white!
-
Tar removal can be done with either dedicated tar removal products (Tardis being the main one that comes to mind) or just use some margarine.
Fish
-
2 down.
I'm not sure what's the hardest to keep clean,black or white!
Black shows the swirls the most, but white shows every grain of dirt. Tough choices, silver/grey every time for me.
Fish
-
Tar removal can be done with either dedicated tar removal products (Tardis being the main one that comes to mind) or just use some margarine.
Fish
Have the tar removal stuff from Autoglym at the ready. I understand it will remove the coating we had applied when new 3 months ago.
Thanks for the reply.
Andy
-
If only the forum software could resize the pictures properly. Half the reduced need to open in another tab/window to see them properly. :(
Great work though guys.
Fish
that's why I resize my images using - http://www.picresize.com/
just press browse, upload and select the resolution you want. I always use best for quality, then click resize. Save the image to web once the image has been resized, copy the link into your URL and copy image location - this is then the link you need to paste in between the coding ([img]...[img])
simples ;)
-
This forum wants for nothing ???
-
before and later in the day....
(http://i959.photobucket.com/albums/ae76/captpicard1701/20160124_122348_zpsnfb5yqzt.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20160124_122348_zpsnfb5yqzt.jpg.html)
(http://i959.photobucket.com/albums/ae76/captpicard1701/20160124_131420_zpsoo1gpdas.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20160124_131420_zpsoo1gpdas.jpg.html)
-
Captpcard it does look good ;D ;D ;D
-
Plasti dip??
Yeap.
-
Captpcard it does look good ;D ;D ;D
Thanks Oliver ;)
-
Thanks Ads.
-
I gave mine a big kiss! :P
-
Mine developed a nasty new rattle, probably exhaust. Hopefully not suspension.
-
Put new GTT wastegate on the car :)
-
hit the 15.000 mile land mark just before turning 6 end of march lol.
-
After a lot of research finally got my long awaited remap😃😃😃
-
Done 12mm front wheel spacers and 16mm on the back, changed completely my Break Discs and pads, oil change, headlight to H1 and H7 and something else that I won't tell hahahaha
-
Are you pleased with them?
I can't really tell from the pics how the fronts look,are they sticking out?
-
Were your wheels et 30?
-
I think you should change your forum name to Carlos Fandango :o
-
I was only joking,mine are et 25 that would make them 13mm inside mine,I think maybe I should change my own name to Carlos ::)
-
Absolute classic ;D
-
Took off my plastic caps and painted my nuts ???
-
Installed logo lights
-
Hi all,
not the right place to introduce myself I know, but it will save me having to make two posts☺. I am Ade and I have just bought a basic new 595 in white. I got it for a knock down price and it came with 17ins wheels at no extra cost. It will fit nicely in with the other vehicles I have, a Lotus Elan M100 and a Ducato long wheel base camper van. All are highly modified, but in a tasteful way.
Now what did I do to my Abarth today. To match the other vehicles I have, I had the wheels stripped and powder coated in gloss back, for what I think is a good price of £220 and they look really good. Eventually it will be either remapped, or have a tuner box fitted, I have had both in the past, the camper van as a tuner box right now, which I am extremely chuffed with, but I would like some opinion's as to which is best for the Abarth. I found the tuner box to be far superior to a remap on the camper, but it is a tried and tested box and it is on diesel, it was a five minutes fit.
Well that's my first post, look forward to meeting some of you in the future.
Ade
-
fitted one of those tiny bee-sting aerials the other day; it's all Aluminium...nice :)
-
Where did you find the bee sting aerial?
Today I fitted some diadem front indicator bulbs.
-
Add 'got a flat o/s rear tyre' to the above!
-
Plasti dipped button and vent surrounds Matt black.
-
finally got around to fitting my air box decals
(http://i.picresize.com/images/2016/02/07/4xHis.jpg)
-
I felt exactly the same when someone dropped the short shifter bomb....😙
-
You guys have only just got started! I'm wondering when one of you gets around to moving the engine to it's correct position....
http://lamengineering.wix.com/lucarelli-motore-centrale#!__italian
-
You have crossed the line right there!
Luckily I managed to pull my eyes away before the image was imprinted on my mind :o
-
DO IT, DO IT, DO IT, DO IT, DO IT!!!
-
CAE Ultra Shifter, Not today but not been on the forum for a while
-
(http://i959.photobucket.com/albums/ae76/captpicard1701/DSC_0001_zpsibn0lpuy.jpg) (http://s959.photobucket.com/user/captpicard1701/media/DSC_0001_zpsibn0lpuy.jpg.html)
-
Fitted some fender washers to the bumper, headlights and heat shield,cheap but nice little addition to the engine
bay,had stereo and air con facia's dipped to match the dashboard,
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_142222753_zpsecjsv8hv.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_142222753_zpsecjsv8hv.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_134507410_HDR_zpstuew74nr.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_134507410_HDR_zpstuew74nr.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_144221477_zpsroay0cmz.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_144221477_zpsroay0cmz.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_152857761_zpsgisrzloa.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_152857761_zpsgisrzloa.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg.html)
I didnt get around to fitting these bad boys yet
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg.html)
-
Fitted some fender washers to the bumper, headlights and heat shield,cheap but nice little addition to the engine
bay,had stereo and air con facia's dipped to match the dashboard,
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_142222753_zpsecjsv8hv.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_142222753_zpsecjsv8hv.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_134507410_HDR_zpstuew74nr.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_134507410_HDR_zpstuew74nr.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_144221477_zpsroay0cmz.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_144221477_zpsroay0cmz.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_152857761_zpsgisrzloa.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_152857761_zpsgisrzloa.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg.html)
I didnt get around to fitting these bad boys yet
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg.html)
very very nice....... 8)
-
Took Dorries for a trip to the Doctors today to fix an annoying dicky brake light switch. So a run to Italia Tech just outside Mansfield way was in order. Dr Matt was kind enough to hang around to provide his docterin skills and though my visit took 45 minutes only five of them was related to the sickly switch gear. The rest was spent having an interesting chat with the owner operator of one of the most friendly and knowledgeable fellows I have met in a car hospital. Also got eyes on Nicos baby which is unwell currently and I just missed the open front surgery on the turbo. Ace chap, very keen on the Pasta Pocket Rockets and all round good egg. Here is a snap of Dorrie post surgery.
(http://i24.photobucket.com/albums/c21/les050964/20160303_170853-1.jpg) (http://s24.photobucket.com/user/les050964/media/20160303_170853-1.jpg.html)
-
My car is 3 years old at the end of the month so I took it for an MOT today. I looked at the service book and it is also 11 months since my last service and a massive 2800 miles done in that time it will also need a service soon.
-
Fitted some fender washers to the bumper, headlights and heat shield,cheap but nice little addition to the engine
bay,had stereo and air con facia's dipped to match the dashboard,
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_142222753_zpsecjsv8hv.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_142222753_zpsecjsv8hv.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_134507410_HDR_zpstuew74nr.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_134507410_HDR_zpstuew74nr.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_144221477_zpsroay0cmz.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_144221477_zpsroay0cmz.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_152857761_zpsgisrzloa.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_152857761_zpsgisrzloa.jpg.html)(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_153946132_HDR_zpshqv5fvp7.jpg.html)
I didnt get around to fitting these bad boys yet
(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160219_135132861_HDR_zps6vjpab5f.jpg.html)
How much these bolts?
-
How much these bolts?
£55 I think
Just bought these cufflinks to wear to my Sons wedding at the end of the month pretty cool for £12 ;D
-
Hey Tony, I am surpised you have not got the quilt cover yet ;D
(http://i3.cpcache.com/product/736961542/vintage_metal_badges_twin_duvet.jpg)
-
Lol I think that might be the straw that breaks the camels back ;D
-
Being playing again today, and fitted this....
(http://i959.photobucket.com/albums/ae76/captpicard1701/20160305_120835_HDR_zps9hh3scex.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20160305_120835_HDR_zps9hh3scex.jpg.html)
-
The short shifter is an epic upgrade. I love mine Mark.
Only driven a few miles since fitting, but your right ads, massive difference - for the best B-)
-
Welcome mark to the short shifter gang ;D
-
I would send it back they sold you a piece of wood mate 😈
-
Prosecco anyone?(http://i155.photobucket.com/albums/s313/tonyspurs/IMG_20160306_103039018_HDR_zpshdnsr6xw.jpg) (http://s155.photobucket.com/user/tonyspurs/media/IMG_20160306_103039018_HDR_zpshdnsr6xw.jpg.html)
-
Being playing again today, and fitted this....
(http://i959.photobucket.com/albums/ae76/captpicard1701/20160305_120835_HDR_zps9hh3scex.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20160305_120835_HDR_zps9hh3scex.jpg.html)
Ah I missed this. Very nice. Does feel good doesn't it.
-
Who is looking forward to the spring to get to work on their Abarth?! Here is what I’ve got planned for this spring:
- Send wheels for refurb (in white). Refit with wheel sealant and spacers. At the same time: Give calipers a clean; inspect and jet wash arches.
- Oil and filter change. At the same time: Inspect floor and dna subframe brace for damage; Jetwash floor; Inspect/clean scuttle drains; Inspect/clean door drains; Inspect exhaust manifold nuts for torque (if access allows).
- Clean engine bay – currently a bit dusty and random splashes of coolant here and there!
- Full detail, including sort various stone chips; fit dna decals (still undecided).
- Interior wet valet.
- Fit Maxton front splitter.
- Fit dna subframe lateral tie rod kit.
- Fit forge turbo actuator (or let pro alfa do it). At the same time: Inspect exhaust manifold nuts for torque (if not already done).
- Remap at Pro-alfa.
I'd like to do it all as close as possible together time wise. But in reality it prob. won't happen like that!
-
Short shifter is a great bit of kit,yes roll on Spring,lightweight rims,Toyos,forged engine,ported manifold,1.7bar,an extra 1000 rpm,can't wait😎
-
Soon will be fallow my car with private number plates and possible wrap ;) ;)
Forgot to mention, might be include bigger turbo, Assetto Corse Spoiler. Leaving my original alloys and taking off my assetto corse racing stripe, but will fallow with black ;)
Just love the way this car looks like...it will be different patterns black-orange. Secret... ;)
So excited
-
As I am making some changes to my Abarth I treated myself to a new Competizione dark trim kit today. New whisker, badges, boot handle and door handles. Bagged a pretty good deal at £180! More changes to follow.
Was that from Molinka on eBay Ads?
-
I got my parts from her too, but she wasn't offering the door handles at the time. theyll look great on your car mate, what colour(s) are you going for?
What's the difference with your new diffuser Chris?
-
This is new diffuser,it's called an aggressive diffuser,a bit more badass 8)
-
Well I'm working on a vinyl colour that matches the gold fleck in the Record Grey paint. It proving frustrating but nearly there. She is currently offering a set of door handles on eBay for £80 and you know she'll take an offer.
Yeah I saw that. They're covers only though, and I already have a full o/s handle assembly so going to get the n/s one from PartsWorld and replace the lot.
Chris, that is badass!! Did you get the carbon one?
-
Thanks,it's pretty cool,I didn't want carbon as it would not work with the carbon exhaust tips,I've base coated it with the Anthracite used on the S3 diffusers then added Matt clearcoat,I thought this would work well with the black and the carbon,it's almost identical to the diffuser/grill colour on the comp.
-
I bought a matt grey whisker off of WhizzBang,tried to fit it today I unscrewed the 4 screws on top of the bumper and managed to get enough room to undo the 8mm nut on the badge but couldn't get the star washers from the 4 lugs off >:( are you guys taking the whole bumper off to replace the whisker?
-
Tony, believe it is bumper off,mine came off when I replaced the same
-
Tony, believe it is bumper off,mine came off when I replaced the same
Cheers Chris,was hoping I could do it the quick way, never mind I'll have to wait until I've got a free day to change it over
-
I've only got on street parking unfortunately so no space to do it myself, so I'm paying a man instead. They're doing my door handles at the same time.
-
Those wheels work really well Chris, they make the car pop.
-
Thanks guys,especially to Adam for helping me to keep faith with the green!
-
Pro Alfa!
Wow All I would say Chris your car is coming to alive with green alloys, looks briliant really :D ;D ;)
-
Looking forward to seeing the progress on everybody's cars when the Brooklands meet rolls around. I should have my novitecs on by then, and hopefully either new wheels or Brembos.
-
Thanks guys,it's going to take a while getting used to handling,I recently had power flex fitted onto wishbones and now with the super light wheels it's totally changed the set up.
-
You will love the Novitecs,the drop is spot on and they dont compromise the ride,great choice👍
-
I've got to sort my stripes now as well as they've started lifting, plus timing belt being done.
I'm going to be at ProAlfa on the morning of Brooklands if anybody fancies convoying from there?
-
I would but seeing as I'm close to Brooklands I'll have to pass on that,let me know if you are there again as I'll definitely pop down for a coffee👍
-
No worries Chris. I'm booked in for a remap so hopefully she'll be a different beast afterwards.
What's next for your motor, or are you done for awhile now?
-
I'm pretty much done aesthetically,next up I'm forging the engine,upping the Rev limiter to 7200rpm and upping boost to 1.7bar,currently running at 1.3bar,that will be it for this year.
I'm looking forward to seeing your wheels,springs and brakes,I bet you can't wait!
I'm also looking forward to your remap results,Chris got over 250ftlbs out of the IHI on a friends car,the IHI is such a cool turbo,it may be small but it runs on race spec bearings with zero lag,Chris from Pro Alfa is not sure what he enjoys more his 300bhp beast(I've been out out in it,it's insane)or one of his mapped IHI,s as they are just so much fun😎
-
Wheels and brakes will be a little while as i need to justify the cost to the wife. Not sure whether to do wheels first or brakes.
-
I would do the wheels as they will really set the car off,the brakes will set the wheels off,also your new wheels may mask your new brakes from the other half......😙
-
Haha, good point! Should be able to offset the wheel cost by selling the old ones too. Do yo know of any good deals to be had? Cheapest I've found them at is £213 a wheel on eBay.
-
Send me your spec,I will better that👍
-
Thanks😎
-
Fitted G-Tech Turbo heat shield,
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg) (http://s155.photobucket.com/user/tonyspurs/media/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg.html)
And a pair of wing badges
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_142632506_HDR_zpsl5eqmffs.jpg)
Then realised I've got a bolt missing from the airbox !
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_102239249_zpsozdcvvlq.jpg)
-
Nice heatshield👍
-
at it again...
(http://i959.photobucket.com/albums/ae76/captpicard1701/20160314_154744_HDR_zpstrzkc87h.jpg) (http://s959.photobucket.com/user/captpicard1701/media/20160314_154744_HDR_zpstrzkc87h.jpg.html)
-
Fitted G-Tech Turbo heat shield,
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg)[/URL
(http://s155.photobucket.com/user/tonyspurs/media/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg.html)
Where did you source the heat shield from Tony?
-
Essesse on funk white😎
-
Where did you source the heat shield from Tony?
I got it from G-Tech,
http://www.g-techgmbh.de/de/produkte/abarth/abarth500/index.php
Go to contact top right hand corner, they then send an invoice and you pay by bank transfer,took about a week from order to delivery
-
I gave mine a bloody good bath, he looks beautiful now!
-
Where did you source the heat shield from Tony?
I got it from G-Tech,
http://www.g-techgmbh.de/de/produkte/abarth/abarth500/index.php
Go to contact top right hand corner, they then send an invoice and you pay by bank transfer,took about a week from order to delivery
Thanks Tony
-
Dropped car off at Avon tuning to under go some more pamper time, post results when I get it back on saturday😃
-
yesterday - Trip to research - oil change, filter cleaned and scorp badge fitted to front grill. Pleased with it.Subtle dark red but you can see it when the sun hits it right :)
Today took my car to get the paint work upto scratch.has light swirls but looking forward to finish from machine polishing but will pick her up tomorrow.
-
Wonderful salvos...looks great
-
Put summer wheels back on with new bolts and centre caps
(http://i155.photobucket.com/albums/s313/tonyspurs/595%203%20years%20later/IMG_20160319_145309881_HDR_zpswc6z3pmv.jpg) (http://s155.photobucket.com/user/tonyspurs/media/595%203%20years%20later/IMG_20160319_145309881_HDR_zpswc6z3pmv.jpg.html)
fitted Matt grey whisker courtesy of Whizzbang
(http://i155.photobucket.com/albums/s313/tonyspurs/595%203%20years%20later/IMG_20160318_161248710_zpsfb2qq8ew.jpg) (http://s155.photobucket.com/user/tonyspurs/media/595%203%20years%20later/IMG_20160318_161248710_zpsfb2qq8ew.jpg.html)
Had carbon covers fitted
(http://i155.photobucket.com/albums/s313/tonyspurs/595%203%20years%20later/IMG_20160319_115228609_zpsswa2nq3j.jpg) (http://s155.photobucket.com/user/tonyspurs/media/595%203%20years%20later/IMG_20160319_115228609_zpsswa2nq3j.jpg.html)
and postie delivered this which of course is now empty!! ::)
(http://i155.photobucket.com/albums/s313/tonyspurs/595%203%20years%20later/IMG_20160315_203048971_zps8wjuygso.jpg) (http://s155.photobucket.com/user/tonyspurs/media/595%203%20years%20later/IMG_20160315_203048971_zps8wjuygso.jpg.html)
-
Opened the valve of my stainless steel monza, the noise... is just epic. Pops on downshift, crackles the lot, love it!
-
Not me but picked up abi yesterday after leaving her for 2 days in the hands of somebody else..*frightening* BUT...glad to say I love the results!
Profesional, honest, kept me nformed nice lad excellent price.
(facebook ryandetails) near bilston.
highly recomended
-
wash
-
Bought my self finally early birthday present of the my private number plates ;D
-
Sat in the back seat and drank a bottle of chianti.Then put my new sticker on the bootlid.()
-
finally fitted my Alpine speaker system 8)
-
Gave it a clean and whilst I was there I applied some GTechniq G1 glass sealant. Let's see how long this stuff lasts.
Fish
-
Happy early birthday to me, thanks to Swen, Ross Johnston and Tim Siegertsz for quick response and help, very much appriciated guys
-
Following you around social media atm, lol nice touch Oliver glad I could help
-
Only noticed that instead Abarth down bellow said fiat... :(
-
Finally stickers arrived this morning. I do like a lot of stickers, i know they might be a lot of colours but who cares ;) ;D 8)
Thank you CB for sending them to me ;)
-
Oliver,you are welcome👍
Plate looks great ;)
-
Final touch up this morning at ProAlfa, Pop off Filter, blanking pipe, small bits and checking knocking sound at the left front of the wheel. It should be all fine hopefully.
-
finally fitted my Alpine speaker system 8)
that appeals to me... Have got the Interscope upgrade, however to my mind that is the amp and not different speakers... Bit jealous ;) A
-
Not wishing to compete with the serious modifiers on here (apparently there are bits under the bonnet that can be changed) I've done an interior trim overhaul. Ok, so it's a pair of seatbelt pads but we're rather taken by them. Courtesy of Greg at the_tuning_shop_team on eBay. Was happy to create me this one-off pair so long as copyright was not infringed. Real leather. Choice of stitch colour. Much nicer IMO than the average plastic ones. Tell him Andy sent you... A
-
This one is for Paul... Refitted and tested 😎 now you're jealous
-
Thank to Chris again for re-checking my car and making sure that everything is ready, also fitted this extra bits. I need bigger pop of filter now haha. ;D ;D ;D Sounds fantastic really.
Also fitted this bulbs on the back, it is more lights coming out
-
Inspired by S13GE I've added some grey Tyre Art to the 'P Zero' rubber. I'm liking the outcomes, especially after some Autoglym tyre dressing... Oh, and what's not to like about fairy lights?
-
Very nice Jennifer ;D ;D
-
Had the grey Competizione whisker and door handles fitted.
-
Road trip to Old Trafford. Man Utd v Everton today. Give us a flash Manchester #girlsgoingtofootball J
-
Nothing done, just a photo shoot
-
Fitted a 'powered by' sticker to the dashboard courtesy of Cartel Parts. Apparently it adds 30BHP 😉
-
Fitted a 'powered by' sticker to the dashboard courtesy of Cartel Parts. Apparently it adds 30BHP 😉
your one is special, it's the + 50bhp version
-
Dropped it into Monza Tuning to resolve the water lose issue and have an oil change. Been loaned a 65 plate 595 and other than the nice dash I wouldn't say there's that much difference.
Fish
-
Bought it a hat,was getting fed up with it being filthy within 2 hours of cleaning,I can now clean the night before and wake up to a clean car :D
-
Loving the hat. I want a hat...
-
Fitted some custom sill trims 👍
-
Fitted some custom sill trims 👍
Where did you get it? ;D
-
Fitted some custom sill trims 👍
Where did you get it? ;D
From Ivano Melisi on the 'Abarth Worldwide' Facebook group.
-
Very excited!!! Have fitted the retro boot rack in readiness for our trip to France. Loving it... For those interested, it's Dutch made by Cabrio Supply. Have also given Lucca a wash n polish and touched up the 'PZERO' paint. J
-
Fitted my miltek exhaust system cheers to keenan for selling it me just the airtec intercooler to fit now
-
Fitted smoked indicators and club stickers
-
:) Alloy fuel and oil caps fitted
-
Road trip!
-
Loaded it onto a Brittany ferry bound for Caen in French France. Good bye grey skies, hello thunder storms! (Actually it's beautiful sunshine at the moment). The Cabrio Styling luggage rack is working out really well. Four-up, food for the week, clothes, sleeping bags, fuel can... Easy.
-
Looks sweet, Love the luggage rack
-
Looks sweet, Love the luggage rack
thanks Darko, it's getting lots of admiring - or maybe curious - looks in Portsmouth. Having debated it for weeks, it has turned out to be an excellent purchase. Not wishing to look too far ahead, but after this trip it is likely to come off, to return for MITCAR I'd imagine. Merci beaucoup, au revoir, et bon vacance moi et Jenniferlouise et petit enfant. Et voila
-
Qué tenga unas buenas vacaciones
sorry dont do french just spanglish lol
-
Hi
I hope your fuel can is full & large as the French Revolution is happening again & fuel was scarce last week
Enjoy your trip
Curly
-
Not done to but ordered for...wheel spacer kit from Italy and carbon-fibre wing mirror covers (oh and white/black badge overlays ordered yesterday)
-
Thanks for your concern and love Curly. Darn Frenchies haven't won yet; we've found the one supermarche with fuel and have enough 95ron for the trip home. Or perhaps to start a counter revolution. #vivelafrance 😎 #vivelaarbarth
-
Hi
Today is the day we officially own our car
We have made the last payment
Curly
-
Fitted G-Tech Turbo heat shield,
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg) (http://s155.photobucket.com/user/tonyspurs/media/Mobile%20Uploads/IMG_20160314_142532461_zpsytuebt3d.jpg.html)
And a pair of wing badges
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_142632506_HDR_zpsl5eqmffs.jpg)
Then realised I've got a bolt missing from the airbox !
(http://i155.photobucket.com/albums/s313/tonyspurs/Mobile%20Uploads/IMG_20160314_102239249_zpsozdcvvlq.jpg)
I've got a few of these bolts spare as they came in packs of 5 when I had to buy one for mine.
PM if you want one.
-
(http://i.ebayimg.com/00/s/MTYwMFgxNjAw/z/p1wAAOSwYmZXGelb/$_57.JPG)
-
Thank to Steve Miller and his patients and great work as professional this is my latest mods:
-
Simply a deep clean 😎 car was in a pitiful state after a week driving in France. Four hours of loving and rubbing has turned it back to shiny, inside and out. Happy now; it was bothering me (us).
-
I picked mine and and cleaned her when I got her home
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000714_zpsccb533qs.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000714_zpsccb533qs.jpg.html)
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000733_zpstdhyb8xw.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000733_zpstdhyb8xw.jpg.html)
-
Took advantage of the nice weather. Washed, clayed and sealed with JETSEAL 109.
-
I will fit sound deadening material underneath the carpet and stretch/fit the carpet properly but this will do until the weekend.
The pops from the Monza are fantastic now!
The rear seats were 26kg btw! :o The backs are especially heavy, the bottom weighs almost nothing.
Ready for the Sabelts now ;D
(http://img.photobucket.com/albums/v617/feb/RSe_zpsvev8pfo1.jpg)
-
how much does the lucozade weigh? ;)
i'd love to take the seats out of mine, more room for my golf clubs lol
-
I havnt done anything today! However just given the car in for:
New clutch
Full Service
OMP Front strut
Forge Silicon Hose
Forge Actuator
Front EBC Ultimax & Yellow Stuff pads
Rear OEM brembo pads
also some advisory springs for the rear
And a few cosmetic touches :))
-
how much does the lucozade weigh? ;)
i'd love to take the seats out of mine, more room for my golf clubs lol
Lol, that's the idea, the dog can actually fit in the car now!
-
Lol, that's the idea, the dog can actually fit in the car now!
My dog gets car sick :( not a good combo with a stiff ride !
-
Fitted wheel spacers - 12mm at the front, 16mm at the back, and also applied the monochrome badge overlays as well
-
My abarth made me buy a Karcher k4 compact today!!! Then it made me clean it.... Again! I'm too easily influenced haha!
-
just put this on my brake light 595 Yamaha racing edition today as anybody got one its one of those things you either love it or hate it I love ithttps://forum.abarthownersclub.com/Smileys/default/tongue.gif
-
I don't mind them and had one but always felt that whenever I stepped on the peddle whoever was behind me was thinking tw@ 😕 so took it off. To be fair if I seen one on another car I would think the same.
-
what you got on your abarth then james lets be knowing
-
What have I got on my abarth?
-
Washed the 595C yesterday evening as J was going out today, which has given me chance to give my BMW some TLC. Perhaps chrome polishing the exhaust is a bit excessive? Although talking to the converted here. A
-
Removed the front bumper to fit a maxton splitter. Also removed the arch liners to clean- so much mud and grit caught behind them!
-
Removed the front bumper to fit a maxton splitter. Also removed the arch liners to clean- so much mud and grit caught behind them!
How easy was the bumper removal? I plan to remove mine but worried of snapping any clips. Where are the screws and clips located?
Thanks.
-
Its not too bad. I did take a lot of photos so will post up a how-to guide.
There is a clip holding the top edge of the bumper flush to the front wing, one clip on each side of the car (called 'bumper guides' I think). Each of these bumper guides has three locking tabs on it, I broke the middle one of the three tabs on the left side :-\ To replace the bumper guides is a bit of a pain as they are riveted to the front wings. So I would have to drill out the rivets and fit a new bumper guide with bolts and nyloc nuts. The headlight would need to come out to gain access to fit said nuts and bolts. It would also need aligning perfectly to make sure the bumper sits straight. So its a bit of a faff to replace these if they get broken completely. Two out of three should still be ok so I'm going to leave it!
-
Its not too bad. I did take a lot of photos so will post up a how-to guide.
There is a clip holding the top edge of the bumper flush to the front wing, one clip on each side of the car (called 'bumper guides' I think). Each of these bumper guides has three locking tabs on it, I broke the middle one of the three tabs on the left side :-\ To replace the bumper guides is a bit of a pain as they are riveted to the front wings. So I would have to drill out the rivets and fit a new bumper guide with bolts and nyloc nuts. The headlight would need to come out to gain access to fit said nuts and bolts. It would also need aligning perfectly to make sure the bumper sits straight. So its a bit of a faff to replace these if they get broken completely. Two out of three should still be ok so I'm going to leave it!
Thanks man and looking forward to the "How to" guide.
By the way I want to replace the headlights, I assume you need to remove the front bumper for this or can you get away and do it from within the engine bay?
-
Er not sure but my front end is in bits at the moment so ill be able to tell you when I get home later, ill take a look!
-
Had a look and you do need to remove the bumper for headlights as there are two bolts that you need to access.
-
Small changes
-
The car is looking good Oliver!!! 8)
-
Cheers leo :D
-
Got rid of the cheap shitty roveresque petrol cap and swapped it for the abarth metal one. It's amazing the difference it makes
-
Gave the abarth a Barth! Then bought a new bombadrone direct from italy
-
Used it as a van!!
Contents as per picture.....
6x 25kg pea gravel.
6x 2.4mtr 12x25 wood battens
5ltr weed killer
2x weed barrier
4x trellis
Me and the missus.
No dip in performance or handling. 8)
Had an argument as to wether it'd all fit in, I lost. :'(
-
Pretty impressive! Last Christmas we had to decamp at short notice to eldest son in Belgium - (will shortly need a visa :'() youngest son, swmbo and me plus all our luggage for a week, all presents inc. for two grand sons and a case of wine on the spare seat - no problem!! Mind you, packing was an 'art'!! Fantastic little cars!!
-
Fitted and wired my new Brodit active mount for my TomTom 2
-
Fitted Twin Horns today. At least I won't be too embarrassed to push the horn button any more ;D
-
I also started detailing the front and then it chucked it down (again) :o
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000801_zpsgq6klhst.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000801_zpsgq6klhst.jpg.html)
-
Wow, your beading makes me feel inadequate ;D
-
Fitted Twin Horns today. At least I won't be too embarrassed to push the horn button any more ;D
Was it an easy job??
I've got some to fit to wifeys car.
-
Yes, just remove the front bumper and everything is in front of you. I removed the standard horn, which is on the passenger side and fitted these.
http://www.ebay.co.uk/itm/like/252363732515?lpid=122&chn=ps&googleloc=1006603&poi=&campaignid=207297426&device=c&adgroupid=13585920426&rlsatarget=pla-131843259666&adtype=pla&crdt=0 (http://www.ebay.co.uk/itm/like/252363732515?lpid=122&chn=ps&googleloc=1006603&poi=&campaignid=207297426&device=c&adgroupid=13585920426&rlsatarget=pla-131843259666&adtype=pla&crdt=0)
-
Also managed to get my new plates fitted.
Hopefully no one objects to the tagline at the bottom ;)
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000806_zps8orirgqm.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000806_zps8orirgqm.jpg.html)
-
Yes, just remove the front bumper and everything is in front of you. I removed the standard horn, which is on the passenger side and fitted these.
http://www.ebay.co.uk/itm/like/252363732515?lpid=122&chn=ps&googleloc=1006603&poi=&campaignid=207297426&device=c&adgroupid=13585920426&rlsatarget=pla-131843259666&adtype=pla&crdt=0 (http://www.ebay.co.uk/itm/like/252363732515?lpid=122&chn=ps&googleloc=1006603&poi=&campaignid=207297426&device=c&adgroupid=13585920426&rlsatarget=pla-131843259666&adtype=pla&crdt=0)
There the ones Ive got, do they sound good??
-
There louder than the pathetic factory one ;D
-
Fitted maxton splitter, all weather bulbs in all front lights, refitted bumper, reparto corse 12/16mm wheel spacers and finally newly refurbished wheels. Taken me all day practically, in between thunderstorms as well!
(http://i1195.photobucket.com/albums/aa389/sjs1011/Mobile%20Uploads/image_35.jpeg)
-
Looking really good SJS!
-
thanks mate! I keep going to the window to look at it on the drive!
-
There louder than the pathetic factory one ;D
Ah no, I forgot about the horn - Wish I'd remembered whilst I had the bumper off this week!
-
Also managed to get my new plates fitted.
Hopefully no one objects to the tagline at the bottom ;)
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000806_zps8orirgqm.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000806_zps8orirgqm.jpg.html)
Nice plate. I expect it'll only be the local plod that would have an issue with the tagline but over 17 million people object to the Euro symbol! Did you order them before the vote? Might have been worth waiting.
-
I guess that's just another cost you will have to face as a result of 'leave' vote - you will need yet another set of plates! :'( Still, that will pale into insignificance compared to the other increased costs we are all going to face >:(
-
I guess that's just another cost you will have to face as a result of 'leave' vote - you will need yet another set of plates! :'( Still, that will pale into insignificance compared to the other increased costs we are all going to face >:(
Freedom comes with a cost ;)
-
I guess that's just another cost you will have to face as a result of 'leave' vote - you will need yet another set of plates! :'( Still, that will pale into insignificance compared to the other increased costs we are all going to face >:(
Agreed a minor cost and it will take them 2 years to decide what we should have instead.
-
I guess that's just another cost you will have to face as a result of 'leave' vote - you will need yet another set of plates! :'( Still, that will pale into insignificance compared to the other increased costs we are all going to face >:(
Freedom comes with a cost ;)
Freedom? I've just lost circa £50,000 in share value so I'm interested in this freedom you mention and how it's gonna improve my life?
-
I guess that's just another cost you will have to face as a result of 'leave' vote - you will need yet another set of plates! :'( Still, that will pale into insignificance compared to the other increased costs we are all going to face >:(
Freedom comes with a cost ;)
Freedom? I've just lost circa £50,000 in share value so I'm interested in this freedom you mention and how it's gonna improve my life?
That's unfortunate but my comment was tongue in cheek and metaphoric.
My collegue's shares went up although he is of the remain group.
Ditto, money makes life more comfortable but the ability to make decisions for one's own country is equally important, no?
There are people that gave their life for freedom two and a half generations ago.
This article may make you change your mind: http://www.eu-facts.org/en/background/dark_roots_europe_lecture.html
-
[/quote]
Freedom? I've just lost circa £50,000 in share value so I'm interested in this freedom you mention and how it's gonna improve my life?
[/quote]
Judging by the fact you have that much to lose in shares, I'm taking it that you don't work in a place where it's 70% polish Romanian and Lithuanian? That is why you wouldn't understand the immigration issues.
Not saying this is true of you, but I have found that anyone with money voted to remain.. And the lower class folk voted to leave as they live in the real world. X
-
I think we should leave politics alone and stick to the one thing we do all agree on ;)
-
I agree.. I get reet worked up when rich folk think they are hard done by...
-
I agree.. I get reet worked up when rich folk think they are hard done by...
wow theres alot of assumptions going on in your statement, but like I said let's LEAVE it there.
-
I agree.. I get reet worked up when rich folk think they are hard done by...
Not hard done by what so ever, just understand economics and that the "lower class" haven't had their voice heard in years, so this is their chance to finally make a difference and "fix" the country.
-
I think we should leave politics alone and stick to the one thing we do all agree on ;)
Yes please. Facebook has recently turned into Hatebook / PoliticsRantbook, lets not have the same here. Let's just stick to cars ay?
-
Anyway - let's get this back on topic - has anyone done anything to their car lately? ::)
I looked at mine & thought I really must give it a good clean, after the Goodwood mud bath at the weekend. :-[
-
Went to the hydro dippers and treated it to some carbon mirrors and front splitter, just want some decent weather now !!
-
Looks good that :)
The problem is now you will be finding other bits to do and where will it all end ;D
-
Some minor additions.
Much more to come, the chrome will be replaced with black ones. Supersprint exhaust. Bilstein coilovers. Black headlights. Scara73 carbon intake.
-
Some minor additions.
Much more to come, the chrome will be replaced with black ones. Supersprint exhaust. Bilstein coilovers. Black headlights. Scara73 carbon intake.
Car looks good my friend ;D
Modify message
-
Some minor additions.
Much more to come, the chrome will be replaced with black ones. Supersprint exhaust. Bilstein coilovers. Black headlights. Scara73 carbon intake.
I take it the LED rear lamps don't throw any errors on the dash?
-
I didn't do anything to the Abarth today. Instead I decided to give the Spider a run out in the sunshine.
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1000832_zpsykjygwil.jpg) (http://s1064.photobucket.com/user/Darren_Horn/media/P1000832_zpsykjygwil.jpg.html)
-
Some minor additions.
Much more to come, the chrome will be replaced with black ones. Supersprint exhaust. Bilstein coilovers. Black headlights. Scara73 carbon intake.
I take it the LED rear lamps don't throw any errors on the dash?
None at all, no struggles at all.
-
Fitted the new horns.
Now it has a proper Italian style two tone parp instead of the feeble toot of the factory one. ;D
Dead easy too........
N/S wheel off, arch liner out, fog light out then there's the horn.
Job jobbed.
-
Fitted the new horns.
Now it has a proper Italian style two tone parp instead of the feeble toot of the factory one. ;D
Dead easy too........
N/S wheel off, arch liner out, fog light out then there's the horn.
Job jobbed.
Nice. I'd like to do this too. Should of done it when bumper was off but forgot!
Did you cut the factory plug off and use your own ones? And no silly can bus dashboard error lights come up I take it?
-
Yes, cut the wire but long enough to reconnect if needs be.
No errors either.
Basically, 1/2 a dozen screws/bolts to get the arch liner out then 3 star nots holding the fog light in gives you enough room to do the job easy.
I put one horn where the original one was and the other the other side, the bolt holding the original horn was used.
Well worth the effort.
-
Yes, cut the wire but long enough to reconnect if needs be.
No errors either.
Basically, 1/2 a dozen screws/bolts to get the arch liner out then 3 star nots holding the fog light in gives you enough room to do the job easy.
I put one horn where the original one was and the other the other side, the bolt holding the original horn was used.
Well worth the effort.
That's exactly what I did, although I took the bumper off, I found it easier.
-
Had the little fancy bits fitted at sturgess today, now I have an abarth at last
New koni's
New mats
New kick plates
New brake pads
New filter
New remap
(Bombardone has come alive with a tad more boost!)
And new monza...which is for sale in the for sale section
-
One more to go :)
(http://img.photobucket.com/albums/v617/feb/S1_zpsypph5eus.jpg)
-
Yes, cut the wire but long enough to reconnect if needs be.
No errors either.
Basically, 1/2 a dozen screws/bolts to get the arch liner out then 3 star nots holding the fog light in gives you enough room to do the job easy.
I put one horn where the original one was and the other the other side, the bolt holding the original horn was used.
Well worth the effort.
Can you takea soundclip of the culprit and where did you buy it from?
-
Will do tomorrow ;)
-
Adjusted my seat runners and fitted new 3D wing decals.
Details are in my thread https://forum.abarthownersclub.com/index.php?topic=3114.msg36202#new (https://forum.abarthownersclub.com/index.php?topic=3114.msg36202#new)
-
Yes, cut the wire but long enough to reconnect if needs be.
No errors either.
Basically, 1/2 a dozen screws/bolts to get the arch liner out then 3 star nots holding the fog light in gives you enough room to do the job easy.
I put one horn where the original one was and the other the other side, the bolt holding the original horn was used.
Well worth the effort.
Can you takea soundclip of the culprit and where did you buy it from?
I've noticed a few people asking for sound files of the different Horns.
Below are two files, one is of my wifes car that has the same standard horn as the Abarth and the second file is of the twin horns like these http://www.ebay.co.uk/itm/12V-Twin-Snail-Car-Air-Horn-Set-Loud-Dual-Two-Tone-Fittings-Truck-Van-Boat-Siren-/152003768423?hash=item2364217067:g:6F0AAOSwBahVeAoH (http://www.ebay.co.uk/itm/12V-Twin-Snail-Car-Air-Horn-Set-Loud-Dual-Two-Tone-Fittings-Truck-Van-Boat-Siren-/152003768423?hash=item2364217067:g:6F0AAOSwBahVeAoH)
http://vid1064.photobucket.com/albums/u376/Darren_Horn/P1000850_zpszgudilgn.mp4
http://vid1064.photobucket.com/albums/u376/Darren_Horn/P1000851_zpsih192fde.mp4
-
I spent 6hrs detailing the car!
Pics in the link- have to show you after all the time spent on it haha :)
https://forum.abarthownersclub.com/index.php?topic=3294.0
-
Back windows are now limo black 8)
ProAlfa exhaust and sports cat also added this week.................I need to stop spending but there's always something that I like to look of :)
-
Back windows are now limo black 8)
ProAlfa exhaust and sports cat also added this week.................I need to stop spending but there's always something that I like to look of :)
its the abarth way....
-
Super ambitious... Fitted pair of AOC stickers to rear windows. I know; radical. A
-
Genuinely ambitious today... Given the car a 'wheels off' clean! Brake dust removed (Angel Wax) re-sealed (Dr Beasley's) and refitted. Wash n polish (Autoglym) and a coat of carnuba wax (Dr Beasley's). All ship shape and Bristol fashion for Brands Hatch tomorrow. A&J
near 6 hours... That's right up there with Villagreen. I need a beer!
-
Both are in at last :)
-
Trading it in and ordered a new one
-
Maxton front splitter :)
-
Sale agreed as they have given me £8k for mine, just getting confirmation over the new headlights as I don't want the old washer Xenons, I want the new shape Xenons instead; these should be fitted, however the 2 new Comps I've seen have the old washer Xenons not the new rounded triangular shaped inlay design.
Modena Yellow 595 Comp
Performance pack - Mechanical LSD, carbon fibre Sabelts, carbon fibre dash, Supersport wheels, gloss mirror caps & side stripes.
Yellow Brembo kit
7" Entertainment/Sat Nav system
Beats Audio system
Yellow splitter & rear diffuser inlays
...and that very special 'secret' upgrade too
8)
-
Washed both mine and the Mrs car
-
Washed both mine and the Mrs car
again?!?
-
Washed both mine and the Mrs car
again?!?
Haha, hers was filthy and I was in the groove so did mine too (it was dirty I promise, don't have OCD) :)
-
Sale agreed as they have given me £8k for mine, just getting confirmation over the new headlights as I don't want the old washer Xenons, I want the new shape Xenons instead; these should be fitted, however the 2 new Comps I've seen have the old washer Xenons not the new rounded triangular shaped inlay design.
Modena Yellow 595 Comp
Performance pack - Mechanical LSD, carbon fibre Sabelts, carbon fibre dash, Supersport wheels, gloss mirror caps & side stripes.
Yellow Brembo kit
7" Entertainment/Sat Nav system
Beats Audio system
Yellow splitter & rear diffuser inlays
...and that very special 'secret' upgrade too
8)
Those are projector lights..not xenons
Not seen them turned on on an abarth, but all the projector lights I've seen on other makes have been like candles (shit)
-
Those are projector lights..not xenons
Not seen them turned on on an abarth, but all the projector lights I've seen on other makes have been like candles (shit)
That's what I thought too
The new style (poly-elliptic as they call them) headlights are projector lens halogen lights - if you have xenons on a facelift car, they are the same units as they have always been.
-
I put petrol in mine! ....that's twice in the 7 weeks since I've had :-[ :-[ :-[
-
I put petrol in mine! ....that's twice in the 7 weeks since I've had :-[ :-[ :-[
Twice in 7 weeks?
I put petrol in mine twice in 7 days ::)
-
Finally got around to fitting my new dash cam, painted dash panel and climate control panel.
Tomorrow (Saturday) will be bath time in preparation for Sunday MitCar
-
Airtec FMIC :D :D :D
-
Airtec FMIC :D :D :D
Me too 8)
-
Delayed MOT today.
Fish
-
Updated my website yesterday, link in my signature.
-
Installed a bluespark and got lots of engine management lights now >:(
-
Installed a bluespark and got lots of engine management lights now >:(
And now its working as expected ;)
-
Finished fitting my Clear Rear lights (details and Video on my website) finished fitting the Turismo suspension (not yet tested). Next job is to fit Cruise Control with Speed Limiter ???
-
bought a bunch of goodys from TMC. Now booked in at pro alfa to have them fitted and a remap :D
-
Stripped the door down to replace the hinge, 10min job so pretty cool.
Darko
-
bought a bunch of goodys from TMC. Now booked in at pro alfa to have them fitted and a remap :D
ooh......what goodies you get??
John
-
Darko did you remove the door card too?
I got an induction kit, acutator and a diverter valve. cant wait for the changes 2 weeks left to get them fitted
-
Darko did you remove the door card too?
I got an induction kit, acutator and a diverter valve. cant wait for the changes 2 weeks left to get them fitted
Yes mate, had to remove the door card and also the membrane thing, was a easy job but you may need 2 sets of hands as its a bit fiddly unhooking the door mech while balancing the door car.
Unfortunately its one of those jobs we are all gonna have to do at some point as the part is clearly not up to the task....
good job the part is pretty cheap.
Cheers darko
-
I need to re tighten the window hinges/scissors/screws as everytime my driver side window is down it keeps shaking and rattling making an annoying noise. Dealer said its a common problem said it will take 15mins and charge £95 I replied see you later
robbery £95 lol
-
Added a third control stalk to my steering console.
More detail coming soon on my Blog. ;)
Heres a sneaky peek
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1010180_zpsj8nzfben.jpg)
-
Added a third control stalk to my steering console.
More detail coming soon on my Blog. ;)
Heres a sneaky peek
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1010180_zpsj8nzfben.jpg)
Oh... cruise control?!
-
I thought that too Stef... Nice touch if it is possible. Anyway, just like to say I've done zip, nothing, nicht to our car as we've been away. Poor this is sitting lonely and unloved on the drive. Probably going to need a good clean! Ooh, that reminds me, Silverstone is coming!
-
Its done Cruise Control and Electronic Speed limiter fitted and working.
-
Fitted a Pipercross air filter.
Didn't help that on removing the bolts the extension & socket fell came off my ratchet and dropped down into the engine bay! :-\ Great cars but with so little spare room under the bonnet if you drop something it's doubtful you'll ever see it again. ;D
-
Added a third control stalk to my steering console.
More detail coming soon on my Blog. ;)
Heres a sneaky peek
(http://i1064.photobucket.com/albums/u376/Darren_Horn/P1010180_zpsj8nzfben.jpg)
What's the thing inserted in the CD slot?
I washed and clayed mine yesterday, ready to get it machine polished, hopefully next weekend. Took it for a short drive to derust the brakes today and tucked it in the garage again.
-
It's a magnetic phone / Sat Nav mount.
From here https://www.amazon.co.uk/gp/product/B0177KHDA0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 (https://www.amazon.co.uk/gp/product/B0177KHDA0/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1)
-
Removed this lot over the weekend
(http://i1064.photobucket.com/albums/u376/Darren_Horn/IMG_20161016_100011_zpstqj9xh4s.jpg)
What I replaced it with and why can be found on my blog. http://darranna.jigsy.com/2015-abarth-595c-competizione-mta
-
The 500s seats dont look too bad! Though nothing matches your steering wheel now you may need to change that?
You reckon youll sell the Sabelts? or maybe put them in the 500s!
-
I have another steering wheel on its way. As for the seats they didn't come from the wife's car, her car is blue with blue trim 😁 I don't plan on doing anything with the Tan trim at the moment.
(http://i1064.photobucket.com/albums/u376/Darren_Horn/Mobile%20Uploads/P1010062_zpscmjxk6yh.jpg)
-
The other day instead of today!
Powermotive exhaust fitted :) :)
-
Dropped it off to the bodyshop to have phase 4 headlights fitted and matt grey badges to replace the chrome ones.
-
fitted a new HD dashcam - already come in useful the last few days...there are some idiots about! >:(
-
No biggy but customizing the inside a little.
-
Swapped front to rear tyres, ready for Silverstone tomorrow :)
-
Today I emptied the car ready to say bye bye to it tomorrow. Shocked how much junk I had in there!
Fish
-
Today I emptied the car ready to say bye bye to it tomorrow. Shocked how much junk I had in there!
Fish
Shame to hear this, I hope you replace it with something of equal or more fun!
-
a new Comp? ;)
Fish
-
a new Comp? ;)
Fish
Lol ok, you pass the test Sir.
-
Added the 'Abarth Day 2016' stickers. I know, another massive upgrade to the 595. Shucks, may have to take a lay down! A
-
Nothing huge but added some decals. Think they look ace. Sorry for the dirty wing mirror. Lol
-
Those decals look pretty neat!
-
Nothing huge but added some decals. Think they look ace. Sorry for the dirty wing mirror. Lol
nice
I've got some of those ready and waiting for the new Yellow beast too!
-
Not a major mod, more aesthetically pleasing to the eye but I love the look. Got these from the well know auction site, headed under m6 fender washer kit in case some one wants to buy some
-
I'm liking this Howell, might look ourselves 😉
-
Posted a pic on Twitter for @AbarthUK ;)
-
I'm liking this Howell, might look ourselves 😉
The neo chrome Ones would look awesome on your car jenniferlouise. (If you still have a podium blue that is )
-
I'm liking this Howell, might look ourselves 😉
The neo chrome Ones would look awesome on your car jenniferlouise. (If you still have a podium blue that is )
Hi Howell_595
I like these. Would you have a link for them please?
John
-
eBay is a wonderful thing. Order placed, may take a few weeks to get around to fitting, as too busy with work to play at present.
-
eBay is a wonderful thing. Order placed, may take a few weeks to get around to fitting, as too busy with work to play at present.
Get some photos up when they are fitted. Love to see them 😀
-
OK so they arrived yesterday and I've fitted them this morning. Apologies that the car is filthy! Put four along the front panel and one on each of the headlight retaining brackets. A
-
Oh nice modifications..... I do hope you've told you're insurance firm. ;) (read that as joking)
Fish
-
Not a major mod, more aesthetically pleasing to the eye but I love the look. Got these from the well know auction site, headed under m6 fender washer kit in case some one wants to buy some
Link please? :-*
-
Fitted her new crimbo prezzie, nice shiney dipped dash !!!!!
-
detailed to oblivion!
(http://i.picresize.com/images/2017/04/09/P8Hef.jpg)
-
Sunday drive out - 500 miles from Lancashire to near Cardiff and back! Early morning blast down the M6/M5 then cut across country for the last hour or so - it is easy to forget how good a quiet motorway can be, after sitting in traffic most of the time if you travel during the week.
Then came back up through Wales, all the way from St. Athan Airfield (it was the Aston Martin Owners Club spring concours meeting at the site of the new Aston Martin Factory) to join the M56 near Chester. Some superb driving roads and fun to be had. A little bit of care needed in the well known biker spots as the unmarked police cars were out to get them on the first warm Sunday of the year.
The 595 ran well - only hitch was the radio packed up on the way back - showing "code error" on the display. So I had to put the top down and listen to the Monza.
A good road trip!
Nicam
-
Sunday drive out - 500 miles from Lancashire to near Cardiff and back! Early morning blast down the M6/M5 then cut across country for the last hour or so - it is easy to forget how good a quiet motorway can be, after sitting in traffic most of the time if you travel during the week.
Then came back up through Wales, all the way from St. Athan Airfield (it was the Aston Martin Owners Club spring concours meeting at the site of the new Aston Martin Factory) to join the M56 near Chester. Some superb driving roads and fun to be had. A little bit of care needed in the well known biker spots as the unmarked police cars were out to get them on the first warm Sunday of the year.
The 595 ran well - only hitch was the radio packed up on the way back - showing "code error" on the display. So I had to put the top down and listen to the Monza.
A good road trip!
Nicam
The perfect Sunday 8)
-
Painted the grill 8)
-
New Ferrari side badges fitted. Got them off the bay at £9 for a pair look quite swish if a little small but they work quite well I think.
Link in case anyone fancies a pair
http://www.ebay.co.uk/itm/222449026635?euid=5e754f4746db4f0bb77e068873be01df&bu=43821810297&cp=1&sojTags=bu=bu (http://www.ebay.co.uk/itm/222449026635?euid=5e754f4746db4f0bb77e068873be01df&bu=43821810297&cp=1&sojTags=bu=bu)
-
Today I spent a couple of hours on the Monza exhaust tips.... half a tube of Autosol later, the results before and after! 8)
-
Now apply a decent sealant to make the next time easier ;)
Fish
-
Never thought of that... what do you recommend? :)
-
Any sealant really, I use either Britemax Extreme Elements or you could look at some of the ceramic coatings (GTechniq/CQuartz DLUX for example). Waxes don't last on them.
Fish
-
Gave my car a chance to unleash the beast within, took him to CarLimits.
-
Never thought of that... what do you recommend? :)
Gtechniq C5 wheel armour nano coating, very hard wearing and heat resistant!
GD
-
Gave it a bloody good clean. Took the wheels off and cleaned them inside and out , cleaned the big red Brembos.
Looking lovely again.
-
Fitted the final piece of carbon dipped dash and rear spoiler extension !!!!!
-
Ashamed to say 'ignored it'. Predicted rain fell so decision not to go for a full valet was right however there's still a need to get the cleaning products out soon.
-
fitted a new HD dashcam - already come in useful the last few days...there are some idiots about! >:(
Which dash cam, how easy to fit was it, and how discreet on the dash area is it?
Too many questions I know, but I would like to know.
Andy
-
XSR play time... Fitted the ally oil cap. Added a subtle nod to 'Yamaha' with a sticker or two. First polish: Autoglym base coat with Dr Beasley carnauba top coat. Wheels and windows tomorrow 'cause it's now beer o'clock.
-
And then the rain came... beautifully beaded 8)
-
And another massive post-purchase addition... fitted a pair of Team Heko deflectors. Always resisted on past cars but rather pleased with the look now I've done it. A
-
Wash and polish, followed by painting in the 'PZERO' on the tyres. I blame Tim. ;D
-
Test fitted my new wheels
-
16's or 17's?
Fish
-
16x7 ET35.
The reason for moving to 16s is to fit 205/45 tyres and get better ride quality.
-
16x7 ET35.
The reason for moving to 16s is to fit 205/45 tyres and get better ride quality.
When I put those wheels (17inch) the ride was so much better, think its because they was nearly 4kg lighter each (tourismo) pot holes and bumps don't shake the car no more haha
-
16x7 ET35.
The reason for moving to 16s is to fit 205/45 tyres and get better ride quality.
When I put those wheels (17inch) the ride was so much better, think its because they was nearly 4kg lighter each (tourismo) pot holes and bumps don't shake the car no more haha
Reduced unsprung weight does help indeed in both ride quality and handling.
I need to order some tyres for them and put them on, they have been sitting in their boxes in the garage for over a year!
-
Ordered a set of these:
http://www.tyrereviews.co.uk/Tyre/Hankook/Ventus-V12-evo2.htm/view_media/Hankook-Ventus-V12-evo2.jpg
-
Ordered a set of these:
http://www.tyrereviews.co.uk/Tyre/Hankook/Ventus-V12-evo2.htm/view_media/Hankook-Ventus-V12-evo2.jpg
Would you be FPAN who had a Forester STI ?
-
Stared at it from the warmth of the front window, watching the sleet fall and thinking I’ve not had chance to wash it for ages! Hurry up spring...
-
I know what you mean JL - the roads are pure filth!
I added some upgraded Osram light bulbs to Rory today, a big improvement in night vision over the standard headlight bulbs and a much cleaner, whiter light 8)
-
I finally put on my new plate that I've had four months!
Spike
-
I managed to take advantage of the weather and give Tax the clean she deserves.
A shiny Abarth is a happy Abarth! 😉😁
-
Fitted the DNA Racing chassis braces last weekend. :)
(http://i68.tinypic.com/inh8wy.png)
-
Gave this little beauty a good clean today ;D
-
Stared at it from the warmth of the front window, watching the sleet fall and thinking I’ve not had chance to wash it for ages! Hurry up spring...
Sorry to say that the XSR still remains neglected; its absolutely filthy! The sun may be out but any bucket of water will be ice before it reached the car today. So we’re watching the bronze medal curling match instead 😎
-
We watched that too Jennifer - tough for the UK team! The 'beast from the East' has arrived big time here (East Anglia) and we have severe weather warnings of snow/ice for Monday and week! Poor old 'Ellie' (see 'name your car or not' thread!) will have to wait a bit longer for a good clean! Checked out gas lanterns/heater/cooking ring so, with enough food to feed an army, we are ready for anything!! Keep warm folks and watch out for the ice!!
-
Had it lowered last weekend. Took a few quick pictures.
H&R springs, Coupe bump stops and wheel spacers (16R / 12F)
(http://i63.tinypic.com/j6ifqw.jpg)
(http://i67.tinypic.com/k1royq.jpg)
(http://i64.tinypic.com/20no0w.jpg)
(http://i65.tinypic.com/2rwuc9j.jpg)
-
Getting my normal wheels ready for swapping with the winter ones.
Used a none acidic spray first, washed and rinsed, then Iron Off, tar remover inner as well as outer rims, then Panel Wipe before drying thoroughly and an application of C5 wheel armour.
Have then dressed the tyres.
All the products I use are Gtechniq and really do appear to do what it says on the packaging.
Have put the set back on the rack for now, waiting until the weather properly improves before fitting to the car. Have to say they do look damn good.
A question for anyone reading this. The tar remover states not to use on area's covered with vinyl. How do I clean the tar off the side stripe on my XSR?
Cheers
Andy
-
Take your strips off! Lol, as long as you don’t get them wet, stick them back on after you wash your car ;)
-
Take your strips off! Lol, as long as you don’t get them wet, stick them back on after you wash your car ;)
I don't think you understand how bad at wall papering I am. Not a cat in hell chance of the stripes going back on properly!
Thanks for the suggestion though...
Andy
-
First wash of the year.... really! Ok so nice guys at Tesco have given it a couple of rinses but today was the first time to get all the products out of the shed. In fact the outside tap was still turned off inside to protect from the winter frosts. Anyway, spent some time today treating the car to a much needed spring clean in preparation for Bicester. Wash, polish, vacuum, leather cream, wheel clean and wax, tyres dressed. So far spent three hours on it, and will add a sealing coat once the semi final has finished.... a bit of sunshine makes such a difference A
-
Frustrating day... made another great purchase from The Tuning Shop (eBay) of a replacement gear lever gaiter, to add a bit more red stitching to the XSR. I’d been thinking about it for a while and having seen Ed’s beautiful Comp on Sunday at Bicester Heritage decided to make the swap.
Removing the gear knob is nigh-on impossible >:( I found the instructions within a thread on ‘isti which implies that the aluminium knob is thread-locked on. I’ve spent too much time this morning, and surrendered some skin, trying to break the bonds. In the end I gave up (unlike me) and went to ATS. A very big fella with vice-like grip had a go... needless to say the darn knob is still stuck fast. So the new gaiter is thrown into the back seat for now. A trip to Abarth is now required to pass the problem to them.
For info (and I may need to post this somewhere else in the forum) the gear lever gaiter is best emoted from the bottom left side first, teasing up the silver ring. Once the half dozen tabs have been released it will lift up. A small cable tie holds the gaiter at the base of the shaft which is easily snipped to release it. With the knob removed the gaiter will then easily slide off. The gaiter is held between the silver ring and a retaining collar inside it, which needs to be carefully separated as the two parts are held together with the weakest of plastic lugs.
I will let you know how I get on with Abarth, unless anyone else has a better 💡 idea. And no suggestions of metal grips; I want to be able to reassemble with the polished aluminium knob unscathed. For now, I’ve put the thing back together again. Did I mention I’m frustrated? A
-
Just a thought Jennifer. Have you thought about warming up the gear knob with a hair drier? Sometimes these locking compounds can be broken down with a bit of gentle heat.
-
Just a thought Jennifer. Have you thought about warming up the gear knob with a hair drier? Sometimes these locking compounds can be broken down with a bit of gentle heat.
Hi Taz, that was a thought, having watched some YouTube where a blow lamp was used on some locked on nuts. not convinced that my dryer would raise the temperature enough. And don’t want to scorch the aluminium with something more aggressive.
-
Hi Taz, that was a thought, having watched some YouTube where a blow lamp was used on some locked on nuts. not convinced that my dryer would raise the temperature enough. And don’t want to scorch the aluminium with something more aggressive.
[/quote]
A hair dryer should heat it up OK, just a bit slowly. I'd be tempted to use a strap wrench on it. https://www.amazon.co.uk/BOA-11022-Baby-Soft-Grip/dp/B002HMRU34/ref=sr_1_1?ie=UTF8&qid=1524932957&sr=8-1&keywords=strap+wrench+small
-
Ordered Bilstein B6 front shocks
-
Looked for my sticker, and realised i still dont have.
-
Cleaned him :)
-
nothing
-
I fitted my new Forge intake and it sounds amazing
-
I took my new 500 out on a long motorway/b road trip to Oxfordshire and back and it didn’t miss a beat.
-
Brought it to it's new home after buying it yesterday, and today I've spent all day machine polishing and detailing it with next to no breeze! :-[
Well worth the effort though, and happy to be back in another Abarth! 8)